• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

.

KNINE

New member
10
0
1
Location
Michigan
I tried the pig-tail without any success. I have tried many other options also, nothing. The solenoid with the pig-tail clicks but nothing engages on the starter. I even pulled the starter out some thinking it my have been hung up on the flywheel. I am meeting up with a buddy tomorrow who has a starter. Any suggestions would be appreciated.
 

Suprman

Well-known member
Supporting Vendor
6,842
654
113
Location
Stratford/Connecticut
Go right to the starter. You should have a big 24v cable going right to the batteries. On the starter solenoid there are 2 small posts, the one closest to the block is the positive to trigger the starter. Take a clip lead, clip onto that post. Touch the other end to the big positive on the starter
 

KNINE

New member
10
0
1
Location
Michigan
Well I whacked and whacked and it wouldn't start. I put on the new starter... and it started up. I also disconnected the pigtail before starting. Thank you for the help.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks