• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

5 Tons under a deuce

USMC6062

Member
371
1
18
Location
St Augustine, FL
Same basic thing, but I'm using a piece of 5 ton frame for one extra inch of lift to offset for the weight of the motor and all. It will be a more involved, because I have to get creative with the steering to make it like I want for tire clearance.
 

USMC6062

Member
371
1
18
Location
St Augustine, FL
Yes I welded plates to the sub frame on the sides, but they will be bolted to the main frame, mainly if I ever had to remove it for some reason. I still have to drill and bolt the side plates, but it has 3, 1/2" grade 8 bolts on each side through the top of the subframe into the botttom of the main frame holding it for now.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks