- 3,923
- 77
- 48
- Location
- Comfort, Texas
Congratulations on the new troop. Buy him any wrenches yet?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Coming Attraction - project #6 M43 build
- Thread starter zout
- Start date
- Status
papabear
GA Mafia Imperial 1SG
- 13,525
- 2,499
- 113
- Location
- Columbus, Georgia
Outstanding work Zout!!
We at CAMO are all cheering for ya from the compound.![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
I showed the CAMO fellers some of your build pics yesterday and they were all amazed.
Looks like we are gonna have to throw a "new member" party early next month!
Blue2actual's wife had her baby too!!
Life is good!
We at CAMO are all cheering for ya from the compound.
I showed the CAMO fellers some of your build pics yesterday and they were all amazed.
Looks like we are gonna have to throw a "new member" party early next month!
Blue2actual's wife had her baby too!!
Life is good!
- 7,744
- 155
- 63
- Location
- Columbus Georgia
Tell her congrats on the new memeber to Life.
Here is where I wound up at the end of today. If my brain was not fried from the heat I think this is where I wanted to end up at the end of the day today.
I am not working on the 43 tomorrow - going to sit and sift out sandblasting media so I can get that nasty a** hood - do not care what I throw at it cause it is that bad w/paint - bondo (NO I DO NOT DISLIKE BONDO) (IT JUST HAS ITS PLACE).
I have my Wild Dog degreaser for pressure washing - this stuff is wicked.
That engine compartment will be beconning for a power plant in the near future.
What comes next after Body work - The ambulance section - sandblasting. I will lay my big tarp out for collection of media so I can hammer the living daylights out of it with this new pressure blaster (its really cool). Then move into the cab.
I need to finish blasting the tire carrier rack - other side of the grille and the center section - with this new toy it should take only a couple hrs and keep screening my media.
TWM - only teach on REAL TOOLS - gotta get the new younin using the high speed grinder here in a couple months
This 43 is so FRICKIN COOL
Pics
Here is where I wound up at the end of today. If my brain was not fried from the heat I think this is where I wanted to end up at the end of the day today.
I am not working on the 43 tomorrow - going to sit and sift out sandblasting media so I can get that nasty a** hood - do not care what I throw at it cause it is that bad w/paint - bondo (NO I DO NOT DISLIKE BONDO) (IT JUST HAS ITS PLACE).
I have my Wild Dog degreaser for pressure washing - this stuff is wicked.
That engine compartment will be beconning for a power plant in the near future.
What comes next after Body work - The ambulance section - sandblasting. I will lay my big tarp out for collection of media so I can hammer the living daylights out of it with this new pressure blaster (its really cool). Then move into the cab.
I need to finish blasting the tire carrier rack - other side of the grille and the center section - with this new toy it should take only a couple hrs and keep screening my media.
TWM - only teach on REAL TOOLS - gotta get the new younin using the high speed grinder here in a couple months
This 43 is so FRICKIN COOL
Pics
Attachments
papabear
GA Mafia Imperial 1SG
- 13,525
- 2,499
- 113
- Location
- Columbus, Georgia
Outstanding! The panel above the door turned out great
Guess we better round up the engine parts!
Guess we better round up the engine parts!
Danger Ranger
New member
- 2,253
- 24
- 0
- Location
- Roland, IA
Zout you are a FREIGHT TRAIN!!!! Always chuggin along. Congrats on the new member. A few days off might do the kid and your brain some good. But don't keep us waiting too long, lol! Awesome job, I'd call it a successful weekend.
- 7,744
- 155
- 63
- Location
- Columbus Georgia
DR - I can put a younger man in the grave working with me. And I am only 59.
Once I have a MISSION - no need to say more as the pics of all my projects explain it all.
Wanna know what its like to work for a living - come send that PIA teenager to me for a weekend of treatment and home thearpy. If their not dead after seveal days they will be worth while to send back to you in a much changed attitude.
Duct Tape - lots and lots of Duct tape
Once I have a MISSION - no need to say more as the pics of all my projects explain it all.
Wanna know what its like to work for a living - come send that PIA teenager to me for a weekend of treatment and home thearpy. If their not dead after seveal days they will be worth while to send back to you in a much changed attitude.
Duct Tape - lots and lots of Duct tape
- 7,744
- 155
- 63
- Location
- Columbus Georgia
nights work
Attachments
- 2,177
- 50
- 0
- Location
- Butler TN.
Great work as always!
- 3,923
- 77
- 48
- Location
- Comfort, Texas
Zout, do you blast the wiring harness and metal or try to go around it?
schwenk industries
Member
- 188
- 1
- 18
- Location
- Illinois chicagoland suburbs
WOW! I don't look on this thread for a while, and what do ya know three more pages of great work to catch up on. Congrats on the grandson. Keep up that quality work its %100 better than how I have been working...Not at all...now that I have time
Congrats on the grandson. Keep up that quality work its %100 better than how I have been working...Not at all...now that I have time
schwenk industries
Member
- 188
- 1
- 18
- Location
- Illinois chicagoland suburbs
Oh Zout could you Please to tell me the interior dimensions of the box and width of benches if it is not to much trouble.
I got me a new plan
I got me a new plan
Last edited:
- 7,744
- 155
- 63
- Location
- Columbus Georgia
I will have to look around for my tape measure - last time I saw it was when I re-tiled the shower - grandkids probably got their paws on it - then try to get you measurements around all my crap in the back.
I tried to wipe the paint off the harness - kind of like why I used duct tape - it will bounce off only for a short time (not like wiping the nozzle across your hand with no glove on) (yes I did that
). I hit the connectors for a little longer plus the # tags - I will wipe a little grease on these to keep from paint sticking - then wash it off later.
You can tell the before and after of the fender seal - there were LARGE cracks in it from all the paint - got it down to rubber - which I should really coat and cover up but I didn't.
I tried to wipe the paint off the harness - kind of like why I used duct tape - it will bounce off only for a short time (not like wiping the nozzle across your hand with no glove on) (yes I did that
). I hit the connectors for a little longer plus the # tags - I will wipe a little grease on these to keep from paint sticking - then wash it off later.You can tell the before and after of the fender seal - there were LARGE cracks in it from all the paint - got it down to rubber - which I should really coat and cover up but I didn't.
- 7,744
- 155
- 63
- Location
- Columbus Georgia
Plan is to chuck on the air respirator - soft out some sand and get inside the engine compartment for a final cleaning like I want it - this first was just to knock off the debris - greasy areas are tough to blast so I will scrape down that panel on the right lower side of the pic above and hit it again.
No rain in sight around here so I may close the hood and wack off the top while I am at it - I can always get a coat of oxide on it. Then get inside the front fender wells for a blast out.
Had the tarp out last night and pretty much saved what I shot and sifted it out again. Just too hungry when I posted last night to update anymore plus almost time to go to bed as I am a big ole sissy.
Passenger side glass is busted so I will just duct tape off the drivers side really good for the framework blasting (PB knows how I am giong to get the rusted out front area - I will only show a before and after pic of how I am going to do this area.
Then onto the roof.
No rain in sight around here so I may close the hood and wack off the top while I am at it - I can always get a coat of oxide on it. Then get inside the front fender wells for a blast out.
Had the tarp out last night and pretty much saved what I shot and sifted it out again. Just too hungry when I posted last night to update anymore plus almost time to go to bed as I am a big ole sissy.
Passenger side glass is busted so I will just duct tape off the drivers side really good for the framework blasting (PB knows how I am giong to get the rusted out front area - I will only show a before and after pic of how I am going to do this area.
Then onto the roof.
Danger Ranger
New member
- 2,253
- 24
- 0
- Location
- Roland, IA
A man with a plan, and an MV van!!! hehehe!
schwenk industries
Member
- 188
- 1
- 18
- Location
- Illinois chicagoland suburbs
"I got me a new plan"A man with a plan, and an MV van!!! hehehe!
WOW I just realized how that looked
Danger Ranger
New member
- 2,253
- 24
- 0
- Location
- Roland, IA
To be completely honest, i posted that after reading Zout's stuff....he has a purpose like none other in projects. But.......you can have a plan too
- 10,885
- 825
- 113
- Location
- Appomattox, VA
You're doing a great job, zout! Keep it up...
- 7,744
- 155
- 63
- Location
- Columbus Georgia
pics
Attachments
- 3,923
- 77
- 48
- Location
- Comfort, Texas
Fantastic Zout. Here I am sitting with a cold beer after blasting, primer and painting a bunch of brackets, hinges, small parts, etc. and feeling good about the day. It is obvious I couldn't be in the same room with you and your talent. I enjoy your posts.
Danger Ranger
New member
- 2,253
- 24
- 0
- Location
- Roland, IA
What would it take to get you up here to do my projects Zout?!?!?!? Its cooler up here!!
Can you work on tractors? hehe.
AWESOME job, the jealousy factor is rising....
Can you work on tractors? hehe.AWESOME job, the jealousy factor is rising....
- Status