Shawn MacAnanny
Member
- 226
- 2
- 18
- Location
- Felton, DE
i believe anything under 14'6" has to be labeled atleast thats what i have observed.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Deuce on a rollback
- Thread starter bones1
- Start date
DEMON
Member
- 58
- 16
- 8
- Location
- Okotoks, Alberta, Canada
Spose I should post a pic of said Tri-drive airride Peterbilt rollback.
Attachments
Ripcord01
New member
- 1,430
- 9
- 0
- Location
- Waldorf ,Maryland
When I sold mine the Gentleman picked it up with a rollback. I laughed but he pulled it up with no problems. locked it down and rolled off. No problems. I guess it depends on the driver and equipment.
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,131
- 113
- Location
- Athens, Ga.
:/
Attachments
![102_0410 [800x600].jpg](/data/attachments/226/226197-0cf12f38340a1906017d9392a2f53f06.jpg)
![102_0411 [800x600].jpg](/data/attachments/226/226198-2f454a8ec4ad528a725903af9d103869.jpg)
papabear
GA Mafia Imperial 1SG
- 13,519
- 2,459
- 113
- Location
- Columbus, Georgia
poop!!!
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
My deuce will fit in my shop with a 10' door with the cargo cover on.
- 225
- 14
- 18
- Location
- Lovettsville Va
Had 12,000 lbs on mine. 23' steel bed with rollers. Moving a WWll glider and Tiger Moth biplane.
Attachments
Stalwart
Well-known member
- 1,739
- 33
- 48
- Location
- Redmond, WA
The guy I bought my rollback from claimed to have hauled a 36,000 lb road grader on it . . . NUTS!
A
A/C Cages
Guest
Well I had a roll back with part of my duece on it. Was the easiest way to take my 109 off and put it on the ground but I used a crane to put it back on it.
Attachments
- 18,539
- 5,830
- 113
Has anyone else done this "word association" thing with this thread????
Attachments
spicergear
New member
- 2,307
- 26
- 0
- Location
- Millerstown, PA
I had one hauled on at Freightliner tandem axle rollback. Truck had cargo bows and full canvas. The guy was allowed something like 110" off the deck and we were under...barely if I recall correctly. Problem was you're so close to the overpass that there's a tremendous amout of air pressure on the canvas at the overpasses. 70mph doesn't help either...IF you're hauling one with full canvas, I'd recommend pulling it off for the trip.
m816
New member
- 483
- 6
- 0
- Location
- Chatham, NJ
rollback
A friend of mine hauled a M211 for me with his roll back. It is a Ford tandem with a GVWR of 70,000 lbs. Only damage to the deuce was to the exhaust stack. Smacked a overhanging branch. Handled the load like a small car. and we had no trouble loading or unloading it ( non running deuce) Just had to watch the height. This is not the toy type rollback.
A friend of mine hauled a M211 for me with his roll back. It is a Ford tandem with a GVWR of 70,000 lbs. Only damage to the deuce was to the exhaust stack. Smacked a overhanging branch. Handled the load like a small car. and we had no trouble loading or unloading it ( non running deuce) Just had to watch the height. This is not the toy type rollback.