Recent content by Earl_Beverly

How reliable would the MEP-831A be if using for the only sourse of power at a off grid cabin? I do not run 24/7, rather 3 or four hours per day, and 12 to 14 hours during the Texas summer when AC is needed. I have been using MEP-002 and 3 generators and they simply make too much power and use...

M-35 a2 Hi Jimbo, I found your post while searching for a M-35 radiator. I have 2 that need new cores. If you are no longer doing this, possibly you can post the core supplier and I can have a local shop do the soldering.Thanks, Earl Beverly

Hi Phil and Wrekerman, I really have need for the tanks. But, if I can't repair, I will keep you in mind on the lid. I put in a blind bid with GSA and got these tanks. I never expected them to have the holes, rather that the valves, latches and such would need repair. I have used quite a bit...

I bought 4 of the aluminum 600 gallon fuel tanks from GSA/Forest service. They were used for water storage and have holes from corrosion and or electrolisys. Is there an easy fix? A cleaner and coating, or bladder for these tanks. Any help would be appreciated.

Ike, I have cleaned the pump strainers. Carl, I will give the pump one more "on the engine" going over to check for trash or metering valve movement, then swap with a pump from a 5kw parts machine that I have. I will also try to find someone to have this pump checked out. This is a very...

Hi Guys, When my generator first failed, it just slowed down to idle then died. Linkage to injector pump was holding to max throddle. I changed filters, vented air, and established fuel flow up to the injector pump. The motor started and seemed to run fine (with no load). Two weeks later when...

H, I have a Hummer H1 (2000). I need the two crossmembers for the rear axel assembly. They are; Crossmember, Rear suspension, front #WA 12338217 Crossmember, rear suspension, Rear #WA 12338222 Does anyone know if these are the same as HMMWV"s. Also, does anyone have the parts? How much? Earl...

Hi, I have some cores here in Shepherd, Texas. Where are you located. You may want to find one that is close. Earl

Bjorn, Do you think a run of straight bio would wash the paraffin from WMO, fats from fryer oil, and other soluables through the fuel filters? Just a thought to run an hour or two of 100% bio to free the filters... Earl

kcgonzo has an in tank fuel pump up for sale on EBAY... or at least he has a picture of one. He sold me a set of M-35 mirrors, neEBAY SCAM … “kcgonzo” kcgonzo@aol.com Aka; B. J. Matyniak 1000 Big Oak Road Smyrna, De. 29977 Phone 302-740-7506 KCGONZO (B.J. Matyniak) sold me a set of mirrors...

EBAY SCAM … “kcgonzo” kcgonzo@aol.com Aka; B. J. Matyniak 1000 Big Oak Road Smyrna, De. 29977 Phone 302-740-7506 KCGONZO (B.J. Matyniak) sold me a set of mirrors for an M-35 back on August 23, 2005. To date – no mirrors. It’s only $182.88. I can afford the loss, but I’m just not that easy...

Hi. I have (3) running M35's, (2) for parts, a M54 dump truck, a 5 ton for parts, a Linclon diesel welder, Military Davy diesel air compressor, Diesel Chevy one ton PU, a D5H Cat dozer, and I generate my own power with a pair of MEP-3's. A while back I bought a Westfallia Centrifugal Oil...

Sounds good to me! I was thinking of cramming in a window unit and mounting a gasoline generator... Sad, but true...