Recent content by jooakes

Thanks all info is good to have I read the codes and got two 121 and 122 both are TPS I'm still reading info from Blue Diesel (good info) will keep in touch. Thanks for the info Skinny I'm originally from Houlton nice to hear from a MANIC.

Thanks I see that the lift pump was replaced with the in tank mod sometime before I got the truck so hopefully that rules out the lift pump. The scan tool and DTC? are you talking about the codes and check eng light? I'll check it again but I didn't see any stored codes. On my way to work...

Ok it's a 99 cummins 24 valve 5.9. From what I've found they made 2 models that year a 12 valve and the 24 valve.

Looking for some info so I can diagnose a power problem I'm having in a dodge ram 3500 I think it's the same motor and transmission that was in the AF tugs on the flight line? Ever once in a while if you back off the fuel when your just driving around you will loose all power no RPMs, no power...

I got all the parts I needed at the junk yard . I got a electric window and all the internal parts for the tail gate. cheep u pull it

I just lined them up. It runs good Thanks:)

I finished putting it together and it's running . I let run up to high idle kicked down and I don't see any leaks. It's ready to go back in the woods:driver: thank you

I just installed a rebuilt IP and can't get the injector line's to bleed. I've got fuel to the back of the IP (electric fuel pump ) and I see fuel in the return line when I unhook it from the IP but can't get any out to the line's. I have all eight lines loose at the injectors so I can bleed...

nice job looks and sounds great. you've inspired me to do one of mine . one ? when you reinstalled the ip lines to the pump what did you use to get them tight? just a open end wrench or do I need a crows foot ?

Wallew When you installed the elect pump did you bypass the mech pump or let it run through it? My 09 is starting hard so i'm getting ready to put on a spin on filter an a elect pump.

What offset are you using for your rims? Will the stock 3 3/4" offset work or should I be looking for new rims. I'm trying to put 35" tires without a lift I like the look of the full wheel well. no rock climbing just mud and snow.:?:

here's a couple of pic when we had a break in the weather and had to move them around to plow.:D

I just converted two trucks last week using the system above. Both worked great.:deadhorse:

If you already have the inside panel off? There is a rod that the glass hits and pushes down (when you can roll the window down) Just push it down and you will be able to open the gate. BE CAREFUL YOU NEED TO SUPPORT THE GLASS WITH THE GATE OPEN AND THE GLASS OUT DON'T BRAKE THE GLASS !

Sounds like the same thing that happen to me when I replaced my lines to the tank . I some how kinked the line when I reinstalled the tank and ending up restricting the fuel flow. I would first look at your new lines and make sure they are not kinked or leaking air in to the system.:grd: