Recent content by Tackettr

Whoops! Story of my life, trying to help local buds out and get myself in trouble. Thanks Ken! To all members: "These are not the Roboimpacts you are looking for" said in my Obiwan voice. Will delete the post not making anything on them to pay.

Sorry I couldn't make it! That is one of my favorite parades! Maybe next year!!

I'll be there with the normal setup and gang.:smile:

Roger that! Keep me posted on what you find.

Update: After 2 road trips at highways speeds the leak slowed down and stopped. I would guess that it leaked between a 1/4 to 1/2 quart before it stopped. I verified that the lines were routed correctly and blew out any remaining oil in the lines. I also verified that the level was correct...

GI Jay, Did you even find out what was causing the oil to come from your Air Switch for the front axle? I am having the same problem with mine. Thanks.

Update: This problem turned out to be a bad diaphram. The problem with locating it for me was not having a helper. I would have to start the truck to build pressure, then place a brace on the brake pedal then jump out and try to back off the vent line on a particular wheel prior to loosing all...

I wish it was that simple. Somehow air pressure is getting to the vent lines only while the brakes are depressed.

Gentlemen, My M923 losses air from the secondary tank when the brake pedal is held, like at a stop light. It will bleed down and activate the low air warning system. There is a hissing sound from the intake stack while this is occurring. I have check all lines and diaphrams/canisters and...

I might have to go that route, buy the whole roll and sell the rest on here. I can't believe I'm the first one to replace the felt on one of these windows.

Update: I still have not found a goos solution to replacing the window run felt on a rear sliding window. I can get a 100 ft roll of it for $180 but can also get a good takeout window for about the same price. Has anyone found a better solution? Thanks.

They appear to be the only ones who make it. That is where I found it for $187 for 100 feet. Note the "CRL" in the item description. I can't believe I'm blazing the trail on this? Surely someone has found a cheaper solution or a good substitute?

Neither one had anything close (McMaster-Carr & Grainger) The closest thing I've found online is "CLR 7/16" x 3/8" Flexible Universal Glass Run Channel. However it is only sold in 100 & 500 foot rolls. The 100 ft roll is $185!!!! Still searching for a better/cheaper solution.

I have searched on here, the internet, and all local parts stores with no luck. I need the felt that goes around the sliding window on a rear hardtop. It's for an M925 but I think they are the same on all M series. Any help would be great. Thanks.

I will be there!! Warthog, thanks for taking the lead on this again! I've been busy trying to get 5 5 tons up and going! :p GO THUNDER!!!!!!