Recent content by tbar123

  1. tbar123

    Oshkosh P-4 Fire Crashtruck Preservation

    I only wish I could. Price?
  2. tbar123

    Oshkosh P-4 Fire Crashtruck Preservation

    I So wish that was in the USA. I just want to sit in it and smell it!
  3. tbar123

    Canadian 5/4 ton in 1:24 scale

    You won't be disappointed. That stuff is model making magic! You have to paint it on, Let it dry then apply. I use it for PE. mainly but it's great for all kinds of stuff. Keep the current build progress going.
  4. tbar123

    Canadian 5/4 ton in 1:24 scale

    Looks good so far! I always use Hob E Tac for windows. Woodland Scenics makes it. It dries clear and if you need to remove it you can. I use that stuff on a bunch of different things.
  5. tbar123

    Thermostat Gasket for the M - 923 1991

    Make your own from felt gasket sheets. It's probably much cheaper and you'll have enough left over for a different gasket.
  6. tbar123

    Bigboy down again,M923 won't build air past 59psi

    The valve in front of the transfer case locks the front axle in when the transfer case it switched to low gear. Without the dash switch being engaged. I would suggest against driving your truck (unless your on private property) until you get this issue resolved. You could have a catastrophic...
  7. tbar123

    Emergency Flashers Inop

    I hope the surgery went better than expected, Just said a prayer for a complete and speedy recovery.
  8. tbar123

    Emergency Flashers Inop

    Sorry I didn't see this earlier. My 84 M923 had the same problem. It turned out to be a broken ground from the rear side marker light. I changed it out with a spare and everything started working again.
  9. tbar123

    Bigboy down again,M923 won't build air past 59psi

    Getagun; Replacing the valve in front of the transfer case (post 56) resolved the airing up problem. Then flipping the piston fixed the air leaking into the stack after I flipped the dash switch.
  10. tbar123

    Bigboy down again,M923 won't build air past 59psi

    So after replacing the above valve, I thought everything was good to go, NOPE! I flipped the dash switch and there was the air in the stack again. So I called Marcfeld up and he pointed me in the right direction again with a few tests to do. I aired the truck up with shop air and when I flipped...
  11. tbar123

    Windshield washer container replacement ideas

    Juan that fixed it? I suppose?
  12. tbar123

    Driver's interior door letters,Meaning?

    I thought it might be a paint "code" but the carb was throwing me off. This paint is about 1/4" thick. Thank You Sir!
  13. tbar123

    Driver's interior door letters,Meaning?

    Might be why I couldn't find a 821 in West By God Virginia, I was looking up the wrong Battalion. Thank You Sir
  14. tbar123

    Windshield washer container replacement ideas

    I actually filled it to the fill line with both.
  15. tbar123

    Windshield washer container replacement ideas

    With the new jug, My lid doesn't blow off anymore, But it still blows bubbles through the vent in the center of the cap. I've taken the nozzles off and blew shop air both ways to make sure the line is clear and it is. Just confusing!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks