Search results

I only wish I could. Price?

I So wish that was in the USA. I just want to sit in it and smell it!

You won't be disappointed. That stuff is model making magic! You have to paint it on, Let it dry then apply. I use it for PE. mainly but it's great for all kinds of stuff. Keep the current build progress going.

Looks good so far! I always use Hob E Tac for windows. Woodland Scenics makes it. It dries clear and if you need to remove it you can. I use that stuff on a bunch of different things.

Make your own from felt gasket sheets. It's probably much cheaper and you'll have enough left over for a different gasket.

The valve in front of the transfer case locks the front axle in when the transfer case it switched to low gear. Without the dash switch being engaged. I would suggest against driving your truck (unless your on private property) until you get this issue resolved. You could have a catastrophic...

I hope the surgery went better than expected, Just said a prayer for a complete and speedy recovery.

Sorry I didn't see this earlier. My 84 M923 had the same problem. It turned out to be a broken ground from the rear side marker light. I changed it out with a spare and everything started working again.

Getagun; Replacing the valve in front of the transfer case (post 56) resolved the airing up problem. Then flipping the piston fixed the air leaking into the stack after I flipped the dash switch.

So after replacing the above valve, I thought everything was good to go, NOPE! I flipped the dash switch and there was the air in the stack again. So I called Marcfeld up and he pointed me in the right direction again with a few tests to do. I aired the truck up with shop air and when I flipped...

Juan that fixed it? I suppose?

I thought it might be a paint "code" but the carb was throwing me off. This paint is about 1/4" thick. Thank You Sir!

Might be why I couldn't find a 821 in West By God Virginia, I was looking up the wrong Battalion. Thank You Sir

I actually filled it to the fill line with both.

With the new jug, My lid doesn't blow off anymore, But it still blows bubbles through the vent in the center of the cap. I've taken the nozzles off and blew shop air both ways to make sure the line is clear and it is. Just confusing!

I've been meaning to do this for a long time now, I was just wondering if anyone knew what these pictures mean. Thanks in advance.

I had a problem with mine blowing fluid out of the top, and replaced it with a new jug(same original equipment) But because I didn't have any washer fluid I filled it with water and worked fine. So The next day I filled it with washer fluid and it still blows out the top. Seriously why will it...

I found the problem( Major thanks to a fella named Marc,not sure if he has an account here or not.)With his guidance we went through what could be the problem. He suggested that I take the lines off this valve and blow shop air through them to see if this was it. Bingo! I blew air through the...

Well went out today and started the red camo, then started big paperweight and of course the air intake leak was present again. I made 2 video's of the problem,mainly because I was holding the phone shutoff button and didn't recognize it. Any help would be appreciated...

I have that hose and for a GOOD DEAL.I also guarantee everything that I sell. These hoses maybe NOS, But are in great shape as I have one on my truck and no defects.I understand concerns for the integrity of a NOS hose, But I cannot under good faith sell anything that I know is faulty!