Search results

I know its not common but I have had this problem twice already . I think I will put a 25 Amp buss fuse on all three terminals and hopefully I wont need to spend another $400 next time around.

My humvee has blown 2 voltage regulators and im on the 3rd one already. It seems that each time they went bad after accidentally shorting one of the battery cable under the passenger seat and its getting expensive to keep buying them. I have installed a grounding harness and im thinking that I...

Whats the tag numbers I can give it a shot

Checked the TM for wire #442A and couldnt find it in the wiring diagrams for M1165A1. I checked above SN 300000 and below 299999 but was no where in the diagram. The harness it comes out of is S/N 9371 and it goes through the windshield tunnel through the right side and has a bunch of plugged...

Thank you very much, which TM are you using I spent hours looking for these

Working on some wiring on my M1165A1 and need to know where these wires lead to from the passenger side battery box (6B 6C) I couldn't find them on any of the TM's and not sure if I actually need to have power going to them. Thank you in advance

So I actually don't need to have any power going to it

Thank you for the attachment but I have all the transmission wires figured out. Theres a harness that come out of the passenger side tunnel underneath the windshield and goes all the way back to the box behind the passenger seat. It doesn't look like its part of the transmission harness and all...

I relocated my batteries and removed the passenger side battery box to allow for more room for after market seats but Im not sure if I need all the power wires connected to the power strip. I know that my heater blower gets its power from there but whats going on in the panel behind the...

I hear a clicking noise coming from the start box even when the ignition switch is in the off position also my wait light is flashing . Should I assume that the start box is going bad? The truck starts and runs with no issues and I believe the box is a Nartron yellow label

But I tried a used relay with the same results and finally a new relay and the light is still on with the switch off. All the boots match the numbers and no wires are cut or exposed but I did check number 3 to the relay and there's no voltage with the ignition off. I'm considering removing the...

Yes I checked that several times

I previously posted a thread about this issue and I tried everything that was suggested but still not fixed. My transmission light stays on when ignition is off and vehicle isnt running, it will go off when engine is running. I have a 4 speed/overdrive transmission running in perfect condition...

Took a look at my speed sensor and noticed that the gear drive housing was loose. I have a replacement but would like to know if there is a certain way to install it, I don't see any threads on the housing

Has anyone installed a rear window on an M1165 with factory hardtop. I'm having a hard time finding one for my truck and need to find one.

I agree and thats why it makes sense to look at inexpensive mass produced parts overseas. The Chinese Dongfeng looks very similar to he Humvee and I have successfully installed interior items with some modification.

Its price gouching. if its a humvee they will charge 5x. I am working directly with a dongfeng parts supplier and I will be experimenting with the doors, measurements are really close. Some of the interior will work on humvees as well but with some modification.

I built my humvee to be as close to an H1 as possible and the military style doors are not what I wanted. Actually some of the humvee parts are next to impossible to get as well. Many of the replacement parts are aftermarket

I am not interested in the military style overpriced doors that are only available at a few places, I already bought the "American Made Option" composite aftermarket doors for one of my humvees and found that the doors were actually manufactured overseas and spent 5k on them. I want real doors...

Looking at buying a set of Dongfeng doors (chineese humvee) and would like to know if they are interchangeable with the AM General Humvee. Seller swears they will work but I'm looking for a second opinion, any help will be appreciated.