Search results

I am placing a vent at the top to let heat escape. I am hoping there is positive pressure to push the heat out. The exhaust is already vented but I think the blow by that leaks around the engine will help that. If not I have found a 1600 cfm fan I can use.

This is exactly what I am doing take away the ask. As soon as I get the final duct work done I will post pics. Mine is not 10x10 its 80inches by like 40 inches buy 40 inches tall.

I will place a vent for radiating heat also. I am going to keep and eye on the ambient temp with in the building. Winter will be fine summer is what I need to watch for.

What are they or where did you find those?

Just to make sure my post is clear I do have the intake fan just like the ask getting fresh outside air. I have also ported the exhaust and hot air from the cooling exhaust out of the structure just like the ask does.

So I am going to make the change so that the engine fresh air intake (air filter) is getting oitside air. I was able to find that the unit needs 1600 cfm at 2000 rpm which is provided by the intake fanct to cool the unit. This will be fresh air just like the ask provides. I was not able to find...

Is or has anyone ran an mep003a or 2a in an enclosed environment with the exhaust having a way out of the enclosure and no other air exchange assistance? Does heat become a huge problem? I am asking since I have an enclosure that I placed an mep3a in. I have ported the air brought into the...

6ft - 15ft max why what ya thinking?

Ok I think I may have a lead on these guys! At least one that will not take my new car to get them. My next question and I can not find the answer is what are the awg wires they use? I think from looking at both of the connectors on the back there are 2 different awg wires. Anyone have any idea...

I do not have fast internet at this time. Slow phone internet only not easy to work and search. Sorry but thanks for the answer.

Will the unit run if I do not have a float positioning sensor? If not can I bypass the censor to see if that is the problem with the unit?

So how do you test that the wires in the over temp switch are working? Does the switch close or open the circuit?

Do you remember what number you called?

Ok cool so I will see what I can find.

How do you build a cheap load bank?

Good to know thanks.

Is the generator the part connected to the motor that makes the power on the 3a and 2a the same? Are they both inter-changeable and run on ether unit? I think they should but I thought I would ask first.

I found the mep003a has a low speed setting of 300 and top setting of 2000 But i also found the mep002a says low of 1600 top of 2250 Is this a typo are they that different? Any suggestions on what you would test first and how? To try and figure out why I am only getting 60 volts ac out of the...

So that makes since that 60 hz is 1800 rpm. That will help me get the speed right. For low ac what would be the first thing you would start to check?

How do yo know if it will or not? I have a craftsmen 82003 multimeter.