Search results

Yep the items I am currently bidding on has the new higher premium on them :(

Just went thru the pictures again and actually that control box looks like it could also be a Paralleling unit (allow two or more units to sync up and share a load that is greater than a single gen could service) The larger units (MEP-804A/B and up) actually have this ability built in and then...

Other than that it looks like you actually got it for a decent price all things considered. Usually they aren't to hard to getting running and it looks like a pretty clean unit so I would bet it's going to be something fairly simple to get it running. (could be as simple as needing fuel and...

That "control panel" that is mounted on the trailer next to the Gen set looks to be what is commonly known as a breakout/spider box there should be like two connections on the backside where other power cables connect that feed breaker panels.

Hello and welcome from Utah. What type of MV are you interested in?

For the chain hoist hit your local Harbor freight and they have a 1 ton model (10 foot working distance) for 54.99 everyday but check your flyers as it is quite often found for under 40 bucks. They also have a 16 foot working distance 1 ton model for like 69 bucks every day and then they have...

Looks like 7:1 or 7.8:1 depending on which engine http://www.unimogcentre.com/unimog404specs.html

http://www.unimogcentre.com/unimog404.html will explain what they are :)

It is located on the Passenger side by the starter. (the starter will partially block/cover the tag depending on what angle you are looking from)

Hello and welcome. Really comes down to how big is your wallet and what you plan on using them for.

Hello and welcome from Utah and it looks like you figured out the avatar question :-)

If your motor was rebuilt/Overhauled you should find a tag such as this: If the transmission is replaced/rebuilt it too should have a tag showing when it was done.

Hello and Welcome from Utah!

What kind of suspension do those seats have? Edit...Let me clarify. How much LIFT/Drop does these seats have?

The item on the floor for the CTIS is the PCU

Personally I wouldn't. Much easier and cheaper to just use another 1ton pickup to tow it back since your about 120 miles from the boarder

Family in Ventura and Oxnard as well as Manteca and Stockton

Did you have the 24v charge selected? (I am assuming you have the G2600 charger)

Hello and welcome from Utah

Currently not as much as you think with the VW Diesel fiasco