Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
What and where are your cords cut? The 24volt feed should be below the A/C connection a little bit. If you look at your passenger side cab window, the 24volt feed is about the middle of the window height. Would be a screw in sealed type entrance into the box. Then all the way at the bottom...
The schematic for the wiring is the TMs. I keep one in the back of my M109. I took all the boxes off of mine (was wired for 100amp service with a 4prong plug) and rewired it for my needs.
I still need to beef up the 24volt wire, but so far has done just fine running my 900watt inverter. I...
If you get the ECWCS sleeping bag, you will not even need heat for sleeping. I am still using the old 1950s artic bag in a coleman sleeping bag myself, but the other friends I winter camp with have the newer ECWS bags.
If we fall asleep (pass out) and don't get up to put more wood in the...
I thought I would share what I have done for electric so far in my m109a3 box.
I took out the original 100amp 3phase service (had a huge 4 connector plug instead of the usual 2) and wired in a Marinco 30amp service plug to feed A/C to the inside.
Inside I have:
24vdc from the batteries...
I am confused. But if you are looking for something in the classifieds, there is a search bar in there. Otherwise, post what you need in the forum related to the item.
Its not bad to do yourself with a tire hammer and a couple of bottles of dish soap.
I dismounted 22 and remounted 11 on a couple of the hottest days this summer.
That is Bubbles from the Trailer Park Boys. Those glasses were the only prop pair they had to last 7 seasons and 2 major movies, one short film, and one early pilot movie.
I used the same Marinco plug and put it in the same place. Only, I took the cover off the truck and drilled and tapped new holes. This way, if I ever want to move the plug lower, I can just reinstall the cover plate and gasket that I took off.
Also, on the SS marinco plug, that cover is...
because it is old faded paint. And when you are putting tire magic on it, your are essentially putting a clear coat over it that will wash off in time.