Search results

FWIW; Duramax LBZ 2006 to Mid 07 - 360 hp @ 3,200 rpm, 650 ft-lbs @ 1,800 rpm Duramax LMM Mid 2007 forward - 365 hp @ 3,200 rpm, 660 ft-lbs @ 1,800 rpm 6.2L - 143 hp @ 3,600 rpm / 257 lb·ft @ 2,000 rpm 6.2L - (US Army HMMWV model): 165 hp @ 3,600 rpm / 330 lb·ft @ 2,100 rpm If I had extra...

PDF copy of "Stanadyne DB2 Operation and Instruction Manual" Regards Joseph

cucvrus, Thank You Joseph

I found a electrical connector unplugged that I have not noticed before, it is out of the main wiring harness between the fuel filter and transmission dip stick, attached is a photo. Truck is a M1031 Do not see any location to connect in the area. Any suggestion where the connector attaches...

Been have a difficult time starting my 1031 in the morning after shutting the motor down for the night. Gradually more difficult everyday. The last two days, the "WAIT" light, goes on after the motor starts, stays on for approximately 45 seconds to 1 minute. Suggestion and or opinion what to...

I have a M1031, the entire right side and center rear marker lights and right rear light stopped working when parking /all light power is applied. The right turn single works. The right side wiring look like is on one circuit according to the wiring diaphragm on the inside door{left front tool...

I had to change a leaking "core plug"{that is what the real name is, people call them freeze plugs - FWIW Read; "A CORE PLUG IS NOT A FREEZE PLUG" -see URL:http://mgaguru.com/mgtech/cooling/cool_105.htm I wanted a "Made in USA Brass plug". Researching I located brass Made in USA plugs. Marketed...

FWIW...... back around March 2014 on Fourwheeler Network there was an article titled; "Building A Winch Bumper - Backyard Mil-Bumper" a copy is at URL: http://www.fourwheeler.com/how-to/body-chassis/1404-building-a-winch-bumper-backyard-mil Regards Joseph

When you take the front bumper{with the winch kit] off could you post details photos? Thank You Joseph

CUCVLOVER, The second photo of the under dash unit, who manufactures and or makes the unit? Thank You Joseph

FWIW The 4L80 Gear ratios: 1 2 3 4 R 2.48 1.48 1.00 0.75 2.07 The 6L80 Gear ratios: 1 2 3 4 5 6 R 4.027 2.364 1.532 1.152 0.852 0.667 3.064

Has anyone considered a 6L80 transmission? You thought? Joseph

I have located the following on other sites; Original Cluster Connections Pin Lay Out Chart Pin Lay Out for Cluster Plug Regards Joseph

FWIW, while searching I located the following posting, titled "73-87 Factory Tachometer Information" at; http://www.73-87.com/7387garage/interior/factory%20tachometers.htm Good Information Joseph

I would assume that is what it is for as the symbol ( the O with the 3 | marks ) is symbol for air brake pressure. Researching this Cluster, I think it is from a Chevrolet C-Series Medium Duty Truck, possibility a C60 Regards Joseph

Located the following surfing; #89-329-6: HARD STARTING COLD-6.2L DIESEL (INSTALL NEW REGULATOR/PUMP) - (Sep 20, 1991) Subject: HARD STARTING COLD Model and Year: 1982-89 ALL TRUCKS WITH 6.2L DIESEL ENGINE "Condition: ---------- Some 1982-89 trucks with a 6.2L diesel engine may experience a...

There was a member, do not recall who, was installing / attempting to install a factory original tachometer to the gauge cluster or a factory original gauge cluster with tachometer. The gauge clusters with tachometer are from civilian vehicles Was fortunate to acquire a gauge cluster (the...

Anyone install a dual thermostat assembly on a 6.2L? Thank You Joseph

FWIW....Do not get offended we have all these "Arm Chair Engineers" commenting. dmilkman589 you already have your 3D Model, run your 3D Model through a "Finite element analysis (FEA) and simulation software" If you need a program look at LISA, a free finite element analysis software package...

goldneagle, What is the model number / part number for the Deutz you installed? Thank You Joseph