Search results

Yes, yes, yes.... Part numbers would be great as I have already called auto zone and NAPA and I'm getting the shoulder shrugs. Regards,

The truck looks in good shape, but not worth that kind of money. Windshield is folded down. To each his own.

It would be the stud, but I'm not seeing studs on Saturn Surplus. Any suggestions where I can pick something like this up locally? NAPA? Auto Zone? Seabrook truck in Seabrook, NH???? Thanks for the pic as it really helps. Regards,

What do they call that inner lug that goes into the drum? That is what I need to get ASAP. Regards,

Bubble gum or super glue. I do plan to change it anyways. I did see the L after taking off the outter lug, but never saw an R. so much for doing it in the dark and the extra paint did not help either. Regards,

That okay, I found out the hard way tonight of how to change a rear outter tire on a duece. My buddy came over to give me a hand. I made all the arrangments to make sure that I had the tools on hand to do the job. We started to break the nuts before jacking up the truck, but could not figure...

Man does it really take (4)hours to change out the fuel filters? It looks like it would only take about 1hour. There is only (3) and I would figure un screw, put new filter in, fill with fuel and screw back up. Anyone have any really clear information on how to do this. I'll search the SS...

Took her up to the highway this afternoon and brought her up to 55mph. Sure seems go be louder and the temp went up to about 175 degrees. It this normal as after we came off the highway the temp slowly came back down to 160. Seem to be nice and straight on the highway and it was about 44...

Well it is the first time we hit the open road with the truck. We took a 30 mile trip to the around the surrounding area. The only thing I noticed is after about 38mph there was shimming and vibration, but figured that to be normal. Can anyone tell me how the truck should actually drive...

The auctions never go up until the last 10 minutes before the end of the auction. No matter where you buy it an EUC is required I believe as it has to be approved by the Security Exchange Commission or something. Because of what the truck is....I was told be cause of the forging capabilities...

While were on the subject. I have not read the section on the manual of how this works yet. Do you just open the vent and turn the switch on high or low. Or is it more involved than that. Regards,

Here is another question. I found a nail in the tire. Do I have to get a new tire, or can I just install a new tube and go to town? Or is there a pad that you put on the back side of the hole so that nothing gets inside and gets between the tire and tube? Regards,

Well there is good new and I'm hoping no bad news. Looks like only one flat that will need repairing. I do have a question though. Are split rims illegal? If so, I'm going to have problems getting an inspection sticker. I was talking to a truck garage yesterday and they did not mention it...

Joe, if you only knew how much appreciate the help my son and I have been getting from everyone, because of guys like you. I do not mind getting my hands dirty, but do appreciate the help keeping my knuckles in the process. Regards,

Hope this helps But yes be sure that your a 24volt system as mentioned by earlier replies. Regards,

This is what I do know as I have just done this. One cable comes from the starter to the positive end of one battery. The then the negative goes to the positive on the second battery. Then the negative from the second battery goes to the frame. Hope this helps. I actually have a picture...

Funny thing is my grandfather showed me that trick many years back when I was about 6yrs old. Spit on your finger and put it over the end of the stem and see if it bubbles. Wish I he had been around longer so I could have learned a few more things from him. No, this leak is near the base of...

Okay, I need some help here. We installed the new alternator and she is starting up great and charging fine now. The voltmeter on the dash is registering green now. I am a little concerned about the temp gauge. I have only had her running for a max of about 15-20min and thought I saw...

n3uka thanks for asking this question as I have been wondering the same thing and have not gotten to cleaning this off yet. I almost bought goof off from home depot to give it a shot. It is worse than crayon whatever they used. Hoping to get my windows back in and install my alternator today.

Bid closed on the Friday before Thanksgiving Nov 19th and I sent the EUC information in within 1 hour of the aution closing. I was told that it could take 2-3 months for the approval as I did not have a new EUC prior to a certain date. I did call to see if they did get the fax I sent the...