Search results

We changed both our steer tires on M925 with floor jack. Just kept as close to tire as possible. Only needed it to take weight off to slide rim/tire off. 1st 1 we used multiplier to break our lugs loose but 2nd 1 we used 1" ratchet standing/jumping on it.

Sorry, video got deleted. I'm trying to get a copy of it, to post on here.

Used 1/4 clear line & 1/4" barbed fittings on each differential. Took breather vent caps out and screwed in barbed fittings. Ran vent line up intake stack alongside fuel tank vent line. We also T'd the vent lines together as we ran to intake stack. Don't have pix but posted a video on here of it...

ANyone know the NAPA P/N for the air horn solenoid? Our M925 solenoid post broke, and is loose. Now being jiggled the horn will stick on. We have disconnected it for now. Need a new solenoid, but would like the NAPA P/N if anyone knows it.

On our M925 It's a good indication if it's clogged, it needs servicing. I had same problem, the issue is they get clogged with gunk/water/rust. I pulled canister, changed filter and cleared the petcock. Now, it drains fine. So, if it's not draining, do a filter change and at the same time...

We had our M923 stuck in 4' of mud/water for 16 hrs. Prior to this trip we lubed everything, ran snorkel vent lines to all Diff's and silicone sealed the air filter housing. After 16 hrs, we didn't have water in the intake, diffs, tranny or transfer case. So doing a little PM work we feel we...

Welcome from FL!

BTW, anyone that might come, if you have a block & tackle, bring it. Might come in handy! We haven't bought one yet. They do have am excavator on site that will pull for free. But sometimes you have to wait for a while. So if we can get each other out, less time waiting! My winch is greased and...

Hi Everyone! To all MV owners in South FL, next weekend is Redneck Yacht Club, Trucks Gone Wild Spring Break! Great times, Mud Truck races, Truck Pulls and LIVE bands! Gates open 8 AM Friday through Sunday! We'll be there with our M925! If anyone wants to confirm coming, maybe we can set up for...

Well, don't know the true source of the lack of power to the capacitor/transfer case lever switch, but, found there was no power to any of this. Traced the main power lead to the main wire harness and lost source after that. So we disconnected at main wire harness and ran new switched (and...

I'm having same problem with M925 not shifting when air pressure is up. I tried switching the wires going to capacitor. Didn't make a difference. I even tried bypassing lever switch and just jumping the 2 connectors to get it to dump air. didn't make a difference. Any suggestions??

https://www.facebook.com/video/embed?video_id=540233222671712 Here's our M923 getting pulled out! Unfortunately, don't have videos of it going through this mud hole. Only got stuck cause we tried pulling someone else out.

Hi yall, got an NHC 250 that has been a hard start since I got it. I read all the posts on here about them being temperamental, but this is my 3rd truck in southwest FL. Previous 2 always fired off like they just shut off even if it sat for a couple weeks. This M925 has a hard start even if I...

Okay, gotta add my 2 cents. GL clearly states the buyer has to request the SF-97. I have requested 4 of them thus far. EVERYTIME I verified the VIN on the data plate personally and used that # on the request form. I understand if the data plate is difficult to read, so you have to locate the...

We're headed up tomorrow at noon. Staying in Atlanta tomorrow night then heading back to FL friday morning.

Thank you so much CARNAC! Donation is forthcoming! Thank you for your time vested looking this up for everyone.

Thanks for the invite. Would love to meet fellow MV fanatics in the area but gotta work all day on 26th and gettin ready for recovery of 923 & 925 following weekend in GA. Just a reminder, we will be at Redneck Yacht Club with M925 weekend of April 5. It's pretty crazy out there Trucks gone wild...

BTW, AWESOME looking truck! My 925 doesn't look so pretty! But still fond of it just the same!

That is the weight you give on SF97 request. You should get FL title in the mail from GL with that weight on the title. When you register the truck, you declare your GVWR, in FL if you declare 26,000 you can drive with standard Class E license, unless you have CDL. If you declare what the truck...

I have a M923 and requested title from GL. About 45 days later I got a FL title in the mail from GL for the M923. Weight on it was 21,600. No issues transferring title to my name. It's a 1983 and I tried for an antique plate on 12/26/12 and they said wait til after 1/1/13 and I could get...