Search results

you may have reversed the red wires on passenger side alt. disconnect all wires on the passenger alt , take a voltmeter and check the voltage on each wire the one measuring closest to 12v goes to the ground on the passenger alt along with the condenser, the one closest to 24v goes to the...

I probably would have stayed with the military system had it ever worked for me but I didn't have the time to try and track down replacement parts, trouble shoot not really knowing if it was a fix. this just seemed to be a better alternative since I've dealt with the civy system before. I...

ya just ask for a temp switch for a 86 6.2 diesel they shoud find it , the switch is not the same as the sensor the switch is set to open the circuit at 125 degrees coolant temp, therefore not completing the circuit and defeating the relay, I really havent had it cut the plugs since the weather...

mangus580, the part # for the replacement harness is in there that should be the only part thats hard to find, I didn't list #'s for the controler relay or the temp switch because there are many different companies that make these and the price varies quite a bit. I figured the person doing it...

zero rust is a great product!!! it has anti corosive propeties and rust converters built right in!! and its tough stuff I primered my truck a couple years back with about 7 rattle cans of the flat black and havent had any rust come back!!! I had some serious stage 1 rust covering my entire...

txstruck Jack up the front end and check for play by grabbing the tire top bottom and shake if it has any play then dive into the bearings and king pin, "I see rebuild kits all the time on e-bay, just type dana 60" sounds to me like you might be having caster allingment issues which can moslty...

were the electric fans in addition to, or replacing the mechanical fan?

congragulations on a great purchase!! this is a great platform for a monster offroader, I dont know if you can drive them on the street though!! the tranny should be a turbo 400/ with either a np205 or np208, the axle ratio is somewhere in the late 6's to mid 7's?? should be based off of the...

In my opinion a 24v set up just for the starter and glow plugs does not justify having it, why not place the electrical load evenly throughout the vehicle and on the batteries? Modern gear reduction 12v starters provide the same "if not more" cranking power and rpms. I like the idea of having...

check out "project truck" in the photo gallery

you could change out the connectors to the hmmwv round pin type and use hmmwv plugs!! everything on the hmmwv is true 24v

"PUBLISH" :oops: well I feel likes an Ijit, thanks for the quick reply!!

I may be smoking but I think my pics submitted only show up when I am "logged in" does this mean that other people can only see their own pics, when I came to the site "not logged in" and went to the photo gallery my album was not there??? It did show up after I logged on??

the front of these trucks is very heavy and does a good job of keeping the wheels on the ground, flex is going to be limited by the stock shocks, for a better ride and more flex aftermaket shocks "I run pro comp es9000 shocks for 0-2" of lift" they will have a longer shock body and larger...

I run 35"x12.5 r17 x-terains with the stock suspension and some fender trimming

my original engine failed because of multiple cracked pistons. my radiator has been recored with the four row using the larger cooling tubes "the old one was corroded badly". I saw the a-1 fan on e-bay but was out bid at the last second, this is where I got the idea of using that fan. I am...

make sure the switch marked service lights is in the on position

I am looking for a A-1 radiator fan!!

has anyone ever modified a radiator fan from a hmmwv A-1 to bolt up to the cucv fan clutch? The A-1 uses a clockwise rotation 10 blade composite fan. Coupled to a 110 gpm high flow water pump and high flow 180 degree thermostat this would be a "low cost" but very effective cooling stystem...

I got mine from the dealership, I just told them its a k30, be sure to specify that its a single wheel 14bolt ff axle and NOT a dana 70