Search results

Morning CUCVLOVER - Thanks, I have the LED strip light and going to install them on the ceiling of the cab and back on the fiberglass. They are cool! 48cj2a - Thanks, That is was I was looking for. Where did you find it? Thanks again S.P.

Evening ALL I am having a hard time finding bulb type, (5711??) for the bulb under the dash (in the middle, next to the 4 wheel shifter) I spent 2 hours looking at the TM's and can't seam to find it Also looking for the bulb for the volt meter (type,numbers or letters) what I want to do is...

Afternoon Looking at fuse block and and just realized I found an extra fuse coming out of the spare port (see pictures) to marker lights (right side). The extra fuse block was hot and was partly melted. (With a 30 amp fuse in it) (Had head light on for about 20 minutes) Looks to me that...

Afternoon S.S. members I would like to give a "BIG SHOUT OUT" to OLLIED (Oliver Davis in Mt. Airy). He took the time to come out to my house and help me put the rack and sector gear in place. It is a two person project. It is great to have people like "Ollied" on S.S. that are willing to go out...

Afternoon things are lining up, got everything installed to signal switch. now having problem with the pin that stops the wheel from turning and gear lever moves freely (pin not coming out far enough) I don't think the key switch groves are in the right location still looking for some...

Morning yes this is going to be a pain in the a$$. I have been working on this for a week, taking brakes when I get pi$$ off, but I still want to try to make it work. I feel like I am almost there and need some help figuring this thing out. Is there Anyone else that might be able to help...

Evening started replacing the wiper, signal, and key switch. After replacing all. I can't get the rack and sector gear to turn. It seams to be locked up. Any ideas? i will be checking S.S. as much as I can. thanks for any help Roy

Refuring to the 2nd picture? I welded a peice of 4" electric pipe (EMT) to the housing base. then made moom shape flat medal to fit oval to round on back side

Morning ALL Just about finished mine. This is what I have left to do: Clamp down "fake" heat sheild. (just for looks) Mount bracket and run brake lines up the snorkel. Then tie them into blue lines that run to the Trans, Transfer Case and front and rear axle. Also planning on installing a...

NUMBERS I looked at the EAST COAST RALLY this morning (vender space selection printable map) and took a count of spaces being rented and not rented yet, looks like 626 total spaces, 479 rented, and 147 not rented. (Math Might be alittle off) Between now and May 14 looks like some more spaces...

I am new to the hobby. (4 years) and I only been to 3 Aberdeen shows. It's is getting smaller and smaller every year. From what I am reading the Findley show is the place to go. I am really going to try to go to the Findley show.

Afternoon I need one front bumper night/running light for an M1009. (Yellow) Roy

Morning My truck had it too. (The truck came out of New York city) Someone told me it might be to put a pad lock on the hood???? There is a hole in the latch that could support a lock.

Thanks for the information cliffyp Fast idle works great now. Need to lubricate plunger, little tight. Thanks S.P.

Morning In my 1985 M1009 I have noticed that the high idle is not working. (when I start it up hot or cold weather) I went and looked at the fast idle solenoid and found that the shaft in the solenoid was about an 1/2 off the fuel throttle bracket. (not running, cold engine) I started the...

Afternoon Thanks Warthog That's is it, Yes it is an M1009, Still trying to find my way around the Manuals. Thanks, S.P.

Afternoon Question: Coming out of the fire wall I have an Blue wire along with the Coolant temp sensor wires (Yellow and Black) (In the same hole) It has an lock type connector on the end of it. Dose any one know what the blue wire plugs into? I looked around and can't find what it goes to. I...

Well - just got finished installing the vacuum/ pressure switch. WOW hat a differance. Starts right up now. My 1009 was a beast starting up when it was below 50 degrees. It killed my batteries and I replaced them. I started with glow plugs didn't help. Change filter again still didn't help...

Morning Had transfer case come apart and the drive shaft dance down the road about two weeks ago. (bearing or pervious owner had no fuild in case, not sure) Remover old transfer case (about and hour and a half) Purchused BRAND NEW, STILL IN THE BOX, Military surplus, transfer case and...

Did a resistor by-pass, Doghead starter relay install, and fuel filter replacement, air filter, clean all + and - on batteries, clean all + and - on fire wall blocks, added dielectric grease to all connections, and clean windows Did all this taking my time in 3 hours Next: will be starter...