Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Take a sawsall and cut two or three blades out of your way. You can then loosen the line easily. Install your new belts, fan and reinstall hydraulic line.
HUH won't u get balance issues?
I installed new belts 3 months ago when I installed my 200 amp generator/alternator. Water could be the culprit for the broken blade. Good idea.. do I need to leave fan clutch plugged in?
When i bought the humvee the fan clutch wire was unplugged (its the small wire on the drivers side when you open the hood) I left it this way cause when i plugged it in it made a weird noise. I have since driven vehicle over 1000 miles on/off road. We were at the lake bottom that day and I...
My m1038 has 40 inch mud tires that are rubbing when I'm off road. I have plenty of clearance on rear so I only want to lift front 2 inches. I've read some people advise against suspension lift.
Would body lift be better? Is so do I make one or buy from company?
Should I just cut fender...
Nice, 3000gt! How's it running? I'll have to buzz you the next time I'm in Memphis. It looks like you've done quite a bit since you got it home.
Like a top. Highly recommended different tires and rims as well as a comfortable seat. Did lizard skin on inside and definitely reduces heat and...
They do fit nicely. They will rub at full turn but barely. Off road when suspension flexes it will touch but nothing major.
Does not touch the hood. Only worry is a have to cut driver side exhaust. Very close to tire:D
With all that being said (ON SMOOTH SURFACES WHERE U CAN GO FAST)...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!