Search results

As I read the manual, remove the IP gear from the IP first, then remove the IP camshaft gear. Then rotate the engine until the crankshaft and camshaft timing marks line up. Next replace the chain and gears. Re-install the IP gear on the camshaft. Rotate the engine again until the timing mark on...

Here we go again. .. time to pull the heads to see what is leaking.

Here is what I have.

I had the same issue when I put my truck back together ( broke the stud off). I used 1/4” all thread and replaced the entire bolt in the starter. 1/4” all thread may be an issue as you are in Italy.

So, just a scraper and razor blades…

Does anyone understand the rationale behind the highlighted caution on this page of the -34 manual? Thanks for any input.

Now the light bar will have to come off. Can’t look like it came out the ‘cars’ movie…

While I wiring the smile on my truck I noticed the coolant reservoir was bone dry. I opened the radiator cap and found that the coolant level was below the heater core return line and the was a large glob of a rusty paste on the bottom ofr the radiator cap. This vehicle has never leaked a drop...

Made some electrical progress today. The RGB Disco off-road light is now functional.

gm 9438916 3/8, 16X1 1/4 https://www.hillbillywizard.com/cucv-and-k30-parts/seat-track-bolt-kit/

The turn signal arm plugs into the wiper switch in the column. https://www.oreillyauto.com/detail/c/standard-ignition/standard-ignition-5-terminal-windshield-wiper-switch/std0/ds811?q=7840274&pos=0

I recently broke the 4wd light switch on my np205. I have spent two days going down various rabbit hole looking for one. Found one 14024304 NOS in Saudi Arabia on fleabay. Waiting for shipment.

This is the same model lightbar in my silverado 3500

I managed a few small projects this week. 1. Rear view mirrorcam is now installed. I did not not like that I am not able to see the trailer hitch. So, I installed a second camera up high. I have ordered a switch to I can toggle between camera feeds. 2. I removed the STE/ICE...

I managed a few small projects this week. 1. Rear view mirrorcam is now installed. I did not not like that I am not able to see the trailer hitch. So, I installed a second camera up high. I have ordered a switch to I can toggle between camera feeds. 2. I removed the STE/ICE harness and...

I found this. Hope it helps. https://www.classicindustries.com/shop/1973/chevrolet/truck/parts/?q=K30%20rubber%20flooring

Malfunction numbers 5, 42, 33, 34 in that order should locate your issue. I am signing off for tonight.

Start on page 2-59 and look for the symptoms you have.

If you did not already know, this the link to all of the manuals. TM 9-2320-289-20 is the troubleshooting manual. https://www.steelsoldiers.com/forums/cucv-tms.114/

Here is a good place to start looking for solutions. https://steelsoldiers.com/threads/cucv-helpful-threads.123199/