Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Nice
I like the inlet and outlet.. the angles are perfect.. That will work slick when you hook up the lines..
The guage is overkill for me.. but I can see it might add to the coolness..
I'd be worried it would be another thing that could fail...
Bleeding...
Sam27...
I think one of the benefits of this spin on system is there is no un needed venting system... it removes one way that can leak...
I didnt want todo this conversion.. but after several tries of trying to stop the leak... I had a choice, either but a replacement off...
ok..
Maybe Engine man typed in the wrong NAPA numbers.
He said 4470.....for the filter base..
But I think he meant to type 4770? Well the Napa parts person figured it out whatever it was...
I used my USPS discount.. saved almost $15 on those two parts total...
But I bought a piece of...
I'm sure you just saved me several Hours...
My Free time is like gold.. I do like working on these trucks..So now I can work on something else!
THANKS FOR MAKING THIS SO EASY!
Red
That's the end that plugs into the temp sensor that is currently installed..
LOL The Army must be running out of parts huh? so they gotta piece it together..
I'm gonna look at another vehicle.. thanks!
OK My WAIT light stays on even if the engine is at full temp..
SO I'm looking to replace the Glow Plug Controller..
The one on the M-1009 has two wires going to it..
The extra glow plug controller I have I think comes from a HMMMV 6.2L..
Is My Glow plug controller an older model..
The wires...
Ok,
I got this sweet old girl from Wisconsin Recently...
M-1009.. 41,000...
I'm not sure she had the best mechanic.. SHE'S in good hands now!
With the help of this site I already fixed the vacuum leak that was causing shifting problems..
Now I'm tracking the fuel leak...
It's coming...
part #
When you get that fixed.. make sure to share the part number..
I backed in my driveway.. so the nose was downhill...
Perfect start up!
But I can see seepage from the fuel filter area..
Filter was changed in 2010... I'm gonna try another filter..and replace the rubber fuel...
Used..
I've used those used Slip Joints before..
I sure would look to find a replacement..(slip Yoke)
My slip yoke went bad.... less than 1 year after a shop rebuilt the driveshaft..
took out the Transfer case...
Lucky for me I had a buddy, with a spare.... (Thanks Robert!)
I...
I have pulled My m101A2 trailer with a pickup camper in the trailer.. The wind slowed me down.. So that tells me I didnt have enough torque.. I'd not take my M-1009 to the mountains towing anything...
Flat lands... in state.. yes..
Just not enough emph..
Add a turbo!.....
I had the rear drive shaft yoke failure. The replacement driveshaft must have been out of balance, but I wanted to check.
So I took a grinder to the old yoke that failed... and got it as close to round as I could in 15 minutes of grinding. I inserted the yoke into the transfer case and...
O Reilys
O reily's auto parts.
They carry many replacement parts. Other than the 24 v system... 24 v starter... its a civilian Blazer.
It's also nice to have friends!
Some things you might need a junk yard.. I needed a new front spindle.. Junk yard... $25
There were so many of these...
I had a front Yoke fail on my rear driveshaft. It took out the transfer care housing...
I got everything back together... but I was wondering how far should the front yoke, on the rear driveshaft, slide into the transfer case, on my M-1009?
It seems to be a little over 50 percent in...
The...
2 cents
thanks Iceman.. but I'm good on Transfer Cases..
A friend has another driveshaft for me.. I will take it in and get it rebuilt, and balanced....
After thinking about it.. I'm not sure I want the one that came off my truck, and bounced down the interstate....It should work fine...
Drive shaft Yoke
I drove until it failed!
or
Found the problem!
I was driving home today and the rear drive shaft separated from the vehicle on the way home.
Looks like the front yoke failed. It was still in the transfer case when I got stopped. I coulda drove it home but..... when all...
more...
You said it isn't tires, yet you describe a tire related vibration. I thought it was at first.. tires were checked by tire dealer......
Does it do the vibration power on and power off? The throttle does seem to affect vibration... When shuddering starts letting up on throttle...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!