Search results

Alky in the gas. Also check the sealing surface where the o-ring contacts the needle valve and inside the carb. One might have a burr and as a result getting the o-ring. I'll look thru my parts bin and see if i can measure a 0-ring for you. Bob

it comes in a carb kit ! and most likely you need a "kit"

All they did was swp out the pulley to a new pump.

Tom aka spicergear built the ttc truck

I,ve found i have 1 piece and 2 piece run flats, mil spec. Those pvc bead locks look good. Thanks for the link

Got 1/2 of the parts back from the cleaner today, the rest should be here very soon.

Nay on the atlas imo go np203/np205 to get the gearing back closer to stock for wheelin. You,ll need it off road in demanding places with those "great big" tires.

Is your arms and shoulders hurting ? Alot of spraying huh ? Looks like 24087 army od green. Nice

i need a 24 blt o-ring also if its new. bob 423-384-8938

i just bought some rubber run flat - bead locks off gov liq. and there seems to be 2 different types here. I,ve seen the completely 1 piece design in 12 bolts but this batch looks like theres 2 more types ! 1. tall run flat (very skinny) seems like it takes 2 side rubber parts for the bead lock...

another thing to check before you get in too deep is the axles, t-case & trans for breakage. very common on snow plow trucks.

I have a repro tail gate ! Also the truck looks like it was moded for a snow plow use hence all the rust. Dont try to make it perfect just a good driver imo. Finding a cab worth having is going to be very tough and pricey...... Bob

PULL VALVE COVER AND CHECK CAM LOBES FOR WEAR & valve adjustment , IF alls good there then check shaft in distributor for it being loose in hsg. if good there then cam chain is stretched or tensioner is bad. you might also do a compression check on all 6 cyls. also lastly you might setup a new...

its very doubtful you,ll be able to rebuild your own water pump because i had to fabricate 4 special tools just to dissmantle the water pump not to mention re-asembling it. parts are as follows 1. aluminum main body 2. pulley 3. impeller ( has to be machined on sealing face before re-a-sembly 4...

bbc and 5.87's ????

A.b.linn, memphis equip or vintage power wagons. Around $45.00

Just waiting on the cleaner to get everything done then i,ll post some good pic's for you fellas. HARDEST PART OF THIS JOB IS GETTING EVERYTHING APART WITHOUT DAMAGEING ANY COMPONENTS !!! I had to make several special tools and it took me a while to design them. Bob

Best looking 4 x 4 truck ever built imo

Going to rebuild 6-12 stock m715,230 tornado water pumps very soon. i,ll be posting some pictures along the way . first will be of a completely broken down water pump so everybody can see what the guts look like. i have them already broken down now and the components being cleaned as i write...

Thanks cpappy