Search results

I have a mep-006a it has no power to the electric fuel pumps and no power to the day tank solenoid or relay. No power to the fuel cut solenoid unless battle short switch is on. Still no power to electric pumps or day tank solenoid with battle short switch on. Fuel pumps and day tank solenoid and...

Did the 200A alt swap today. Not hard but time consuming. The kit was a bit confusing there are extra parts for different variants but no install manual just diagrams and the parts TM diagrams were very helpful. With the original alternator the voltage would dip down a bit here and there, still...

Just a neat thing I thought I would post. I have no idea how it goes on.

I have a bunch of these Niehoff 400 amp 28 volt alternators. They are big you can see the tape measure in some of the pics. It weighs around 120lbs bare and just shy of 150 crated so it can go ups. 300 bucks each pp gifted to will atpawnking dotcom.

Does anyone know where the alternator gets the sensing feeds to the regulator I have an issue with the 12v the sense line is reading low, and is causing an issue with regulation. I followed it into a bundle. The TMs don't really have a full schematic and there's no troubleshooting for 12v...

I was looking to add some relay contacts to some of the empty spaces on the breaker panel. I found the manufacturer Dillblox.com Fargo Assembly still makes the panel and its modular so you can replace individual sections if damaged or corroded.

Factory horn didnt work so I swapped the small horn behind the bumper for a Federal Signal speaker and put in a Whelen 100w airhorn/pa. Air horn honks from factory button still. Added some cheapo led lights in front, I have some nice CAT hid lights they were a bit too big to squeeze in that...

Their website clearly states they will now issue a sf97 with the purchase of a hmmwv.

I have this beta fuel supply point set at dix I think its in the 600lb range. I was wondering if anyone could pick it up and put it in their backyard or something till I can get someone down to get it. Thanks Will will atpawnking.com 203-378-7105

The door lock uses an older Volvo key blank. I took the lock out and up to my local locksmith and he figured it out. When I got back I tried the key in the passenger side and it did not work so different keys. The lock cylinder is held together with roll pins he didnt want to take it apart for...

I have a few of these I believe they are updated versions of the M915 M916 and other AM General semi truck steering shafts. The part numbers dont seem to cross to anything in the TM's that I could find. Dimensions to the M915 version are about the same. Can anyone shed any light on this? Thanks Will

I have an older MEP-007B its a 1981 I believe. I got it drained/dry it has sat for a few years. When filling the coolant I noticed alot coming out around the front most injector it was bubbling out. I couldnt find a parts breakdown tm for this gen I searched and it seems around the injectors are...

I looked in the manual it showed me most stuff but where is the priming vent on the pump? Thanks Will

Getting my first mtv delivered soon I was wondering about adding tires slightly taller. I searched the forum and found an older post with an inquiry about widening the stance but nothing specific on using taller tires. Any input or would be appreciated. Will

I set it up with the switch in the trans so when I put it in reverse with the engine running the rev lights and cam screen comes on. Dual cams are switchable on the screen and the rev cam system is powered via an extra accessory lead on the keyed ignition so it all turns off with the truck...

I have a M1088 tractor at Bragg. Sold as a non runner. It looks all there and should roll with air to the brakes. I was looking for someone to recover and store it. GP load out is Mon Tues and Wed 8am to 12:30 only, and it's by appointment. Someone who knows the LMTV and could take a look at it...

I have a case its a piece of test equipment. The listing says 100lbs on the pallet I think its around 75 pounds for the unit itself. The case has handles. I didnt realize when bidding that it wasnt at the Lockbourne or related sites. My fault. I was going to have it picked up by a freight truck...

I have a MEP-006a 60kw gen. I have used these gens before without issue. I just got this one and cant seem to get it going. New fuel filters installed, I get good fuel feed to the injection pump but none into it. This pump has the internal fuel solenoid and there is 24 volts to the contacts. The...

I have a MEP-006A it has an odd setup installed. There are extra oil lines and coolant lines, there is some type of agitator or pump mounted on the oil pan and there is some housing on the gen with an opening on the front right. Anyone know anything about this? Will

I have an exciter I am looking to see if its compatable with a mep-004a gen and if not then what is it compatable with. The part is 30554-70-1367 it is a 60hz exciter regulator box. I looked at the parts tms for the mep 004a 005a and 006a gens the exciters all start with 30554 but have slightly...