Search results

If the spring brake override releases the brakes I would check the roller valve on the parking brake. Also make sure the front service glad hand has a vent on it and it is clear. When you release the brakes a little air vents out the glad hand.

I made a little tool to help press it in and I got it in.

Anyone have a good trick on installing a new Spindle Bushing in a M925? I have removed the old one and need to install the new one without damaging it.

There we go, I forgot to look at Rapco's paint. Thanks!!!!

I was going to do that, but I was thinking that someone had the code already. Thanks

Anyone have a Behr paint color code for the light green inside of a S280 Shelter?

Email sent with pics

Here is the p/n and a link to Erik's that has them. nsn 5330-01-299-6616 p/n12356775 http://www.eriksmilitarysurplus.com/fucapresefor.html

Nice job on the roof!!!!

Welcome!!!

aua :cookoo:

I saw GL-1 and 10w oil at a C.A.L. Ranch store.

I used my M936 to put my S-280 in the back of my M923A1.

The Red Dot Humvee kit is 24v not 12v.

I were steel toe from time to time, but one day I was with out working the M936 and I dropped a boom support on my right foot. It broke the middle toe. If I would have had steel toe boots on I would of been ok. So I guess it is not a bad thing for GL just have to remember to take them with you...

The Primer pump only has two or three o-rings in it that can be replaced. It does sound like the motor is sucking air. You need to check your fuel lines, fuel filter seal, etc.

Wow, Now that is a load!!!

I would think 4140 chromoly would work great.

I looked and I can not find it in the parts TM also. I found the pto linkage parts, but no valve.

That is the PTO Control Linkage valve. When you engage the PTO on the transfer case it locks the brakes.