Search results

I have a 30k for sale in the classifieds. Runs great. http://www.steelsoldiers.com/showthread.php?138150-Mep-005a-and-M353-trailer&highlight=

If they have a winch they do. But some of the trucks have the pto and HD ( called Wet Kit) setup but no winch, look for the HD tank on them or the controls in the cab.

You need to fix the air leak first and then you can test the front axle by jacking up one front wheel and turn it, you should be able to turn it in the unlock position, then turn the switch to lock position and see if it locks in and does not turn.

Here are some pics of the old spool and the new two stool I installed. I still need the winch control cable. Yes I would like you would need a little big tank then the one on the M932. The one on my m929 hold about 6.5 gals of HD.

My m929 did the same thing on the right side, The top plate rubbed a hole in the line.

I am finishing up my winch install on my M929. I could not find the HD valve that was used on the M930 so I redid the valve setup. I used a two spool valve made by Prince. I have it all working, but all I need is the push/pull cable for the winch control and I will be done. Yea! The only...

Sounds like some of my days working on my trucks, but it all fun right?

It will tow it but, if there is any type of hill it will slow slow way down. Just do not be in a rush. Yes I would make sure the brakes are working. Also the M989 trailer does not back very well.

They did the same thing to me when they damaged my M923A1 after I previewed it and then won it. But it was out of Tucson, AZ

Welcome!!!

Glad you got her going!!!

Looks like the axle inter seal.

Glad you got her going!

I would just try to keep priming it tell you get some out the bleeder at the back of the pump. Or you could of got some dirt up into the pump, hope not.

I would just resolder it up. The line running to the tank is copper not steel.

That is what I had to do to my M923A1 when i got it. Keep losing prime.

Be sure to only go to 3-5psi.

Yes it is a dry heat, but so is a oven.[thumbzup]:)

The transmission was slipping.

Yes you can, But I got a deal on a motor and transmission combo. So I just changed them both and now I know I have a good motor. Yes it was more work to do both.