Search results

only if my wife knows i am looking at another old truck, those old trucks need saved even if we kill new trucks to do it. I already have a 2016 running gear ready and waiting for a transplanted body my wife doesnt worry about me talking to other women, she worries about me talking to Tony from...

what? more green iron at the haystack farm? yes, it was a horse trade for hay, traded it as a non runner, bypassed the pcb with 3 wires and made it run, kinda hurt the guys feelings because he had 2 other non green mechanics look at it, it did have a cracked fuel filter housing that was throwing...

Its just the way we are, helping neighbors, might be me next time needing a place to park some green iron, glad to help

@cancunlarry short short version, if there is a flame, 2000 ohms or less, prefer less than 1000 ohms from wires F to F at K8 relay on H82, or wire TB3-1 and wire TB3-2 from terminal board TB3 I think those are the right leads on the h140

best off the shelf replacements I can find are Honeywell C554a Westwood E80, E81 is cad cell eye only for both manufactures if you order, make sure you get the correct length leads, some were short as 6" or as long as 60"

@cancunlarry is there more to this question? like the wires for the flame detector got burned off the sensor

@Guyfang also might move this to 'other-auxiliary-equipment' forum not govplanet gen questions

flame detectors have the wiring built in, its sold as an assembly, wires and sensor

i seem to remember something about 'not needing to shave or a haircut for awhile'

What happens to an H82 when you bypass the safeties, K8 and thermostats? Lucky for these guys, you only fill the burn chamber with fuel and it floods out and not explodes the whole thing. There is a time and place for testing but for everyday operating, use the safeties, they are there for a...

that genny is running off grid in montana for the past 3 years, not a hiccup that i have heard about.

This is what a 005 30kw that was locked up from wetstacking looks like when you finally get it to roll over and start. https://youtube.com/shorts/eYIebmttjZs?si=YNO6YNsnaf7nQ8Pt

JD 4045 is common motor, any farm JD will have the rubbers in stock, I dont have the numbers for them, there are 2 different sizes, I have had to replace every mechanical pump due to not being able to hand prime or sucking air. any serial mouse will work as a temp replacement to the key pad. if...

run some kerosene thru it, like 50.50 with good clean diesel, and add some diesel 911 to clean the tank. or run external fuel with good diesel to eliminate any fuel tank issues. Verify the boot is clamped on both ends on combustion fan. also check no mud dobbers built a nest in fan or fan...

if its a fuel issue, replace all of the rubber bushings between the collar and fuel lines on the suction side and at the injection pump.

this is not the correct forum to post questions, maybe a mod will move this to the correct forum.

and there is a fix to a faulty unobtanium K8 relay. this is not exact, it does not have an alarm line, but it does have a light. the colored wires are same same, T-T are B-W from old, and F-F are same. I used this on a H82 that has been a cycle 2-3 times before running every time, with this...

post a want to buy, or start another thread

here is the fuel diagram, sounds like its bypassing back to the tank