Search results

I have a sibling to yours, no bogie's for mine either. Mine says aluminum on all exterior panels. As a bonus, mine had a 50kw onan generator mounted in it.

Here's a couple more that I snuck in at the airshow after everyone else left.

Another description for the MPU is a tachometer for the computer. Yes we could enginerd some way to produce 2.5vac, but that would only tell the computer that the engine is cranking at 300rpm. then when the engine starts the MPU produces (pretend b/c I have never measured) 4.1vac at 1300rpm...

Here is a video, this is not of a 805, but the process of testing is exactly the same. As the video shows, my mpu needs to be adjusted. https://youtu.be/fb0fmCUZj7Y

For those who care to know the back story on how AMi came to be in our stables. She was never intended to be, we had a more than capable 5T that would pull a tanker just fine. We were returning from a car show and someone else was not paying attention, 5T died a glorious death to protect its...

following

To keep humans and animals happy does not require 24 hr/7days of generator operations unless someone has some kind of medical condition that requires some piece of equipment that doesnt have a battery backup. There is always some time during personal use that a genny can be shut down for an...

https://www.steelsoldiers.com/showthread.php?154446-All-the-TM-s-you-need-to-work-on-the-MEP-005A

AMi will get thrown in the mix this month.

Plugs are on the way, make sure to update us with photos of your build

Did you get your jenny fixed?

https://www.steelsoldiers.com/attachment.php?attachmentid=602120&d=1452034471 Do you know military Technical Manuals (TM's)? The above link is for the ARMY TM 9-2815-254-24, for IP pump removal, start on pg 57 on pdf reader, or TM page 3-31, task is 3.11.1. IP pump installation starts on pdf...

https://www.steelsoldiers.com/showthread.php?148936-All-the-TM-s-you-need-to-work-on-the-MEP-804A

Yes, J5 is trickle charger, J8 is the block heater. Also, I edited my post #16 to include the genny

I might also have a plug to fit the J5 .

I have one left. It only has short tails on the end so you would need to add more cable to go to the building.

This is what i came up with so far. https://www.steelsoldiers.com/attachment.php?attachmentid=674267&d=1491493802 The above link is for the hvac, the below link is for the genny https://www.steelsoldiers.com/attachment.php?attachmentid=674268&d=1491493840 the next info was stolen from the...

I may have a connector that will fit that J1. What is the dimensions inside the collar? Does it give you an amp rating for it? 60amp? 100 amp?

Try running with the fuel tank cap removed, if it runs with no issues, clean the tank vent. Also look in the pleating on the fuel filter, might have hoses breaking down.

well