Search results

I have an 005a that probably spent its whole life under a 'less than favorable' condition on a water purification unit, 3300hrs. Here is the thread if you want to read https://www.steelsoldiers.com/showthread.php?164640-3-The-smoker-MEP-005A&highlight= Even under the worst conditions for a...

I need a button that says 'does not pay attention to detail' Your question is how long is safe under a light load. My uneducated answer is a very long time, because you said you could load 50% and that will help. There needs to be about an hour a day of all the load you can throw at it, even...

clothes dryer was asked about.

it only happens if there is a video.

There is something addictive in CARC paint, its like they put cocaine in the paint or something. I have not met anyone yet that only has 1.

So has throttle cable been checked to verify the lock/cable are servicable and mounted tight? Also is the return spring still on the IP where the throttle hooks up? After the electrics were repaired, it sounds like the throttle cable is stretched, or the lock isnt locking correctly. Not even...

A diesel only needs 3 things to run: fuel, compression, and air. So you have verified 2 of the 3, air for the air cleaner check, compression for the extra batteries and it cranks, so only thing left is fuel. Purged the metal fuel lines at all 8 of the injectors like you said? It makes a mess...

Easiest way to do that, joe snuff buys them from gp, joe snuffy trading post picks up and delivers . I know its a pita, had that problem when the farm (155mm farm) buys equipment from iron planet, so 155mm transporters has to pickup/ deliver and charge 155mm farm with an invoice

Another thing in having to flash the field, try adjusting the crank sensor exactly by the book and see if that fixes the modified start sequence. Dont worry anout holding the start sw in the start position for too long, the starter disengages onits own unless you hear it grinding. Sorry for so...

Sorry forgot the good stuff, excellent that it was the fuse!!!! And attaboy for being able to recognize the instability

When you adjusted the injection pump, did you tighten or loosen the set skrew on the rear of the throttle mech to make it smooth up? If you loosened the wide open settings thats ok, if you tightened, that means the governing electric thingamabob has no throttle. I think your stability setting...

oh now i feel like a doofus, WALL LOCKERS, not axle lockers.... note to self, dont drink and post to SS.

Are these items stored on the 3rd floor of a whorehouse that has no elevators and must be crane lowered to street level? then a rigging crew would be required.

That sounds like GL is been talking to some of these LUMPERS. 'oh we have guys to unload your truck for you, they charge $200.' thats ok, I have a pallet jack oh you cant be on our dock, its against osha ruling so how do i get in the trailer to unload? you have to hire our 'in house' lumper...

I had to stop watching those youtube videos pertaining to 805b's, I would have been posting rude comments about how the video'er was doing it wrong and telling ppl the wrong things.

Here, this is correct way of doing a start. Notice that the fault reset does not work unles the start switch is in the run position. https://youtu.be/U-RWshepFRk

well the interweb takes longer to get across the pond, so i have a head start, also you give them a 4 course meal, lots of yum yum good stuff, i just give them the #7 MRE, looks and tastes like caca, but you will survive

I am pretty sure the 3 amp fuse is the bad boy

Not grounding the set would not cause the fuse to pop, BUT it does cause you not to become bacon if something else is fubar. You have to remember this set will produce 300 amps of power. All that is needed for ground is a set of jumper cables from the GND or L0 post on the load terminals to a...

Post some photos, sometimes we learn more from whats in the background of photos than what you are taking a picture of. Dont question the procedures, just marvel at the results.