Search results

left one has the broken wire, it wouldnt do anything, no lights, no nothing. right one, keeps throwing over/under voltage fault light. checked voltage before and after motor control box, and i have correct voltage, 120v on all 3 legs. My opinion is, fix the broken wire and then start control...

check the ohms on the crank sensor same thing happened to me on my 804a, can mechanically open the inj pump with a skrewdriver, and it would run and shut down on its own, no hertz adjustment tho. adjusted the crank sensor 3 times, and finally followed the directions exactly and has worked...

MEP 003a= 10kw

Also very happy with ez spout conversion with the large hose, small hose is only good for week eater and push mower. Any luck on finding parts for metal extension for cans? Or a good source for a new replacment

I am not putting any gauges on until I can at least make the fans run.

well, I spent ALL DAY chasing a wiring diagram, and it comes down to a dinky ol thermistor wire broken, and I said foowee for today, gonna go sit in an easier chair and drink a barley pop.

boatman, you are about as much fun as a bag of anvils, hahaha, well I was pretty sure that it still wasnt going to work even after 6 hours on the jenny, but the poor guy can wish.

I did see that, but not powered for a continuous 6 hours, probably 4 hours total in 3 days, I am supposed to be off tomorrow, will start jenny in the morning and let her run. Wouldnt it be nice if it were just the capacitors had fully discharged and nothing was wrong. thanks for the upload, I...

this is the schematic and tm i am using. Have not removed them from the camper so I cant give you the nsn, but this is what i can get of the data plate.

If you do want to do the sewerzuk mod, just make sure you get an 004 or an 005, this mod WILL NOT WORK for an 804, 805, 806. I second the 'knowing what you consume' so that you can get the correct sized, if you are sizing to a MEP guess low, if you are sizing to a comm'l available guess big...

input volts is right on, so i will have to dig deeper. Anyone know if there is a bypass for the motor controller to see if the motors work?

I never powered up before with 3 phase, but I was out of phase, i had them hooked up L1L3L2, when i change to 1-2-3 it fixed the light issues. now to work on the heat/ac units, one doesnt power up, the other show over/under voltage. I am not a pure'ist, so I may just toss the green units and go...

Sooooo, we go out to play today with a jenny. Hook up to my M373 trailer to see what works and what doesnt work, I can get single ph items to work like the lights, plugs, fans..... none of the 3 ph stuff works, the smarter than I am box says 'incorrect phase' light is on. The power light is...

if you can detour 250 miles out of route, I have stuff going to Belgrade, MT which is 15 miles west of Boseman. The detour would be to Guymon, OK

for sale?

disregard last transmission, the old one just swelled up after closer inspection

Today I noticed that I have had the drain well nut start leaking on an 805b, the wellnut has a larger shoulder for these larger genny's, the pn for the larger shoulder is Z3816. The A3816 works to plug the hole for now, but if anyone has leads on a z3816 or more a3816 I am in the market for at...

No need to cut a bed on a m932 its a 5th wheel tractor with winch

try making the photo less than 2mb

I converted mine from 14.00/20's to 11R24.5, it makes it a little bit shorter and slowed the top speed down about 4 mph. I like the idea of commercially available tires, plus your spare is mounted right next to the one that decided to show its insides to the outsides. They are almost to the...