Search results

No two seperate systems, the -10 will have the operating of each system

This member was trying to mount a winch on a 809 truck, he was sold a set of 939 extenstions and told they would work, they would NOT work, he had to find a set of 809 extensions.

Holes WILL NOT line up, another member went through this same problem a few years ago. winch is the same, the frame extensions are different.

The tm is part of the USMC ribbon bridge TMs because the MK18A1 is a RIBBON BRIDGE launcher, selfloading containers, flat racks, ect. is a secondary use.

yep, a right front blowout put the 819 in the ditch then airborne, sorta makes a exciting day

can you flip the hubs

look for a bit of dirt or metal on a roller or in the race

Bad bearing

There is a data plate on the dash stating what fuel can be used. The 'multi-fuel" is a motor designed to run on DIESEL fuel BUT can run on battle field collected fuel if needed includind straight gas (very dry, engine killer), the idea was that fuel the truck, compleat the mission, get the men...

Most of the time they were side mount, not to many center of bed mounts, everything from a high door post for a 60 mount(the gun ring mount bracket with a pipe) to bits of pipe welded to the headache rack on a dump. Just so you know WE did not have any rings when we landed in country (this does...

In vn, a lot of mounts were do it yourself either by the motor pool or the using crew themself, if it worked it stayed, if not a redesign was called for, but in the end there was a functioning mount for whatever weapon was to be mounted, some were not pretty but worked as intended. Also remember...

Got a NIB block coolent heater for the 250 Cummins, first $35 gets it

Dan, You could drive it to the 13SSGAR

This is a 1955 wrecker, adjustment is good, all the lines blown out before the new cylinders were installed, about the only thing I can think of is something is broke in the left front, we may know tomorrow or sunday

Do you need a cherry picker, I could bring one, the same one that set the gun ring

The wheel cylinders are all brand new with about 300 miles though that is a thought also, do not see any signs of a leak, no loss of fluid, good peddle, if this was a old system I would know where to start looking, but EVERYTHING is NEW but the steel lines and those were flushed out. Guess it is...

The line is brand new, about 300 mikes old, though that is one of my thoughts

Swiss,s m62 pulls to the right when braking, I can lock up the right front as well as the rest of the tires, there is about 300 miles on the whole brake system, I can tighten up on the left front till the wheel is tight to turn by hand and at the same time have the right front backed off, the...

I looked for my ratio post, could not find it and search, any search is not my best friend, so as a last ditch efford to find the ratios, I checked my notes, yep they were there, so hear they are, also as a side note, a power divider OR a interaxle differential could be had for number 2 axle...

Cam, I got the ratios from a "MOTOR'" Truck Repair Manual, have no idea what they were used for