• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 73m819

    Airbrake hand controller 'Trolley valve' install assistance needed.

    Check the 211 series TMs (older 5t before the 809s) the m62 wrecker had this as OE.
  2. 73m819

    Trailing Arms

    you need to read the -20 and the -34, you would be surprised the info. these contain. a good chance you do not need the tourch, not that hard to change, a BFH will be your friend, remove the bracket from the axle, use anti-seize when doing the install.
  3. 73m819

    67 Kaiser-Jeep M35 repowered

    Bet it is a 6v53
  4. 73m819

    67 Kaiser-Jeep M35 repowered

    Isreal had DD powered deuces, also Canada had them
  5. 73m819

    parting out M54a1 looking for M936 IP

    The m816 and m819 use the same ip as the 250 powered m936s, p/n are the same
  6. 73m819

    Another Gainesville Ga. event

    As the date gets closer, I'll contact everybody
  7. 73m819

    Another Gainesville Ga. event

    Just a update as the date is getting closer, I need to know who and with what is taking part in this event by April 19 (entry form turn in date), It is RAIN or SHINE May 5, so far a m819 and two m35a2s have commited. later on I will post a map to the event. I am thinking about all meeting up in...
  8. 73m819

    250 rpm control with hand throttle

    call, pm heading your way
  9. 73m819

    250 rpm control with hand throttle

    pm inbound
  10. 73m819

    250 rpm control with hand throttle

    OR build a air throttle like I am doing, my 819 is missing the ip with the auxilary governor, and the hand throttle gives me the same problem, one thing, the 250 MUST be at operating temp to get the hand throttle to come even close to working right. You will have better luck controling...
  11. 73m819

    Winch Safety and Recovery Dangers

    One can be as DANGEROUS as the other, depending how used, can be VERY deadly
  12. 73m819

    ATF or propane injection

    PUT the 290 in, once you do, you can pull up to 400 hp if you want (more if your heart can stand it.) The problem of running ATF is that it has friction enhancers, this ia what does the cleaning, scouring the parts, not really the thing you want to do to an ip that has VERY CLOSE machined...
  13. 73m819

    Cracked A3 Wheel

    Still a cracked wheel is a cracked wheel, if you could fix them SAFELY, there would NOT be DOT regs against it, there is a reason for these regs, "someone DIED because of a repaired wheel", not ALL repaired wheels will fail but why take the risk knowing that it can happen and if it does, maybe...
  14. 73m819

    Sussex NJ MV Show

    Anybody coming from the Ka. area, If so PLEASE contact me, I have some tires that I need to move east, THANKS
  15. 73m819

    M923A1 with Hyd PTO - no winch

    Most likely USMC truck
  16. 73m819

    ATF or propane injection

    Propane or any extra INJECTION for a maybe ONE time use PULLING motor BUILT for it is one thing, I would be VERY hesitant with a road motor
  17. 73m819

    Navy deuce

    In vn the SeeBees deuces were green
  18. 73m819

    Pictures of Memphis REB kit???

    Did you CHECK the 5 threads listed at the bottom of this thread
  19. 73m819

    M923 won't start

    If this is the case, you might "think" about another set of batteries
  20. 73m819

    Winterville GA- Arcade GA

    Or a lift tow (wrecker operation)
Top