Search results

These are pics from the petterson article on the M1008 build. I will try to find the link. I am still trying to get my 24v HMMWV 12k winch tucked between the frame rails.

Anybody know where to get the small star dacals for the front bumper?

Well the superlift kit should be here anytime now. I will let you guys know if that takes care of the problem.

RE: compushift... That is awesome, I cant wait to hear how it works out.

I have a single rancho now. It fixed the wobble for about a month before it came back.

RE: Dual Skyjacker steering stabilizer question? DANA 60 M10 I wish I would of known that before spending another 115 for the superlift kit. Thanks

RE: Dual Skyjacker steering stabilizer question? DANA 60 M10 I spoke with an idiot from skyjacker today. After being on hold for an hour and being disconnected once, the dumba$$ told me that the kit does fit my vehicle. I asked him for a picture of the installed product or simply where the...

Transmission pump, that kind of makes since. How hard is it to swap the pump. I assume the trans needs to be pulled. The fluids are all at the correct level. Based on ease, I was thinking about swapping the engine oil pump (most critical) first to see if the noise goes away. Then work my way...

This is the gas version.

Thanks guys, I did remove the inspection cover and found a small metal chip on the bottom. Not sure what it from. I checked the bolts to the torque converter and they were fine. To clarify, it was the oil cooler line that broke. I did do the screwdriver test on the inspection cover and oil...

This one is complete including the blackout drive light on top of the headlight. Does it look mean or what?

So I got the kit the other day and it came with instructions for a two piece tie rod. Skyjacker confirmed that I have the right kit. I replace the factory shock with the skyjacker shock. I cant figuer out where/how the second shock mounts to the housing/ tie rod. Skyjacker said it goes on...

So the other day I decided to due some easy preventive maintenance and swapped the radiator. While taking of the oil cooler lines off the radiator, one of the hard lines crumbled. A hour job turned into a day project. To get the truck running until the replacement hard line arrived, I used...

Waiting on EUC so approximately 30-45 days out. There are 5 containers. Each container is the size of a pallet and weighs 700-800lb (Motor). They have holes on the bottom for a pallet jack. THX

Thanks, I just need to find a carrier to pick them up and move them to Reno.

Trying to get five palletized engine containers to sparks NV. Any ideas would help. ThX

Sombody has to have one or a dozen.

I just won several 6.2's in TX and I need to know the auctual deminsions of the crate ofr shipping (I dont not trust GL). Does it have pallet holes so it can be moved with a pallet jack. Detailed pics of the crate would be appricated. Thanks in advance

I just got billed $60 for the SF. The DMV up here would not even look at the paperwork without the 97. GL doinig anything to make money these days.

I have a extra rebuild kit from MBM for the K30. I think I paid $50+shipping for it. Make me an offer if anybody needs it. I will also post in the classified section http://www.mbmbrakeboosters.com/Images/web-catalog/pages/kit50.htm