Search results

"not demilled"....? So, it still has a live ejection seat.... ? We had to blow a few of those in Iraq (before they were used against us).

If the Air Switch is bad, the brake lights stay on... so you would not have turn signals either (correct?)

Wow.... mine doesn't smoke AT ALL. *but i like it.

Looks like a standard Uhaul rental to me... I tried to rent one to move a small tractor and it wouldn't clear the open floor runners. I suspect it was modified by someone to support their MV hobby.

Nice....!!

Seems like i see bed cranes every day lately.... I'm still debating which side would be better, on drivers side seems like it wouldnt make a blind spot on the road, or worse while backing. I do have big mirrors, so i'm weighing the options.

I got the Curt 15400. It's rated 17,000lb with 2550lb tongue weight.... Paid $185 new/delivered.

I think i invented a few new cuss words while installing mine, but mine was hanging on a 4x4 with a 2 ton chain fall and a couple of short straps. As i sat in the cab floor with the passenger seat out, after 3 or 4 dozen trips crawling under and then back inside the cab... FINALLY, and how i...

Mine was my fault for not using safety wire on the bridge over the fuel rod. It vibrated itself loose and the pin on the tip of the rod was not making contact to the shut off plate, so it just idled erratically till' i stalled it out and fixed it.

I had to stall mine out in 5th, but it didnt go "wide open"... but it wouldnt shut off with the cable stop.

Remember, grade 8 may be "stronger", but it's also more "brittle" and would snap, where a grade 5 would "stretch"... or did i just hear that somewhere...?

I used a 3' breaker bar (braced on the ground) on one side, and a torque multiplier on the other to install my adapters, works really well.

When I got mine, he (Peashooter) sent me a list of the required hardware, how much torque to put them on, and even a place he has located that will assemble a bulk package "special Peashooter package" of the hardware. (NY Fastener or something like). They are MUCH cheaper than my local fastener...

It was almost humorous, seeing the slick plywood and what they had "tried" to use to free it. They had quite a hole worn out, and there were 2 other trucks there, but didnt look like they had any straps or chain... I had it 90% free with the deuce in neutral and gravity doing the work, then a...

I did my first "High Water Rescue" today... (no pics). One of our neighbors got stuck in her front yard in a 2wd dodge (on wet grass).... Still Counts. :p

How much cable would you loose if you use a grinder and cut the cable at the pinch point?

I had a rattle on a generator from a heat shield, it was much easier to fix than pulling the valve covers.... Also a pinhole exhaust leak at various RPM can be an annoying or deceptive sound. I've seen a tiny rock that was stuck in a fender support that made a horrible noise... it could be a...

Has anyone mounted a super single spare up under the rear? The rears are further apart and the spare could be moved forward. (not a hijack just asking)

Hello, and Welcome. From Granbury, Tx.

I used the deuce to build a 12x16 pavilion in our back yard. Sure is nice to be able to work from a 8x13 scaffold (tailgate down). Being able to step up on the bed rails put me up almost 6', so it's really nice to have a very stable work platform to get things done, without being up and down on...