Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I think my CTIS control module went bad. It has been acting up, not completely displaying words and such. I could shut it down before and restart it and it would work but it finally died. Does anyone know where to by the control module for a m35A3?
pulling
It was the air line. I wrapped a little bit of duct tape around the leak just to test the idea and it steers great. Not the first time duct tape was used to take the guess work out of things. I did use the air tool oil, Thanks. I hope the local Napa has the ability to make a new line.
zoning
I'm sure you have been told this but the local zoning office probably has a zoning book with all the rules for around $14. That seems to be the standard price in the few offices and the you will be forarmed and might even be able to put up a number and verse on your fence the sith can read.
I want to add my protest to the complaints of 100 post rule. Some of us have been members for years but don't like to yak that much. To be a member for years and not to be able to sell something is not right. I know there is loads of work involved and many ideas on how it should work. I just...
quiet
I built a snorkel intake out of pvc and ran it up the passenger side a pillar just like your picture. I ran it all over the dunes and pulled a baot also without losing any noticable power.
I have been there ( Alaska 2 times) I coverd 2,200 miles after we flew there each time. You would need to run in groups there while driving military vehicles so you would have folks around you that know how to work on them. Not many repair shops that are cheap.
I get a little touchy when I work at something and can't figure it out but this fellow needs some more vitamin "P" (prozac) Dude calm down, we are all on the same side here! You can complain, but without getting personal.
You have to really like the truck to stand the cold and possibly getting stuck or digging out a buddy. I'm going to say maybe, if I get my A3 ready in time.
Just changed the filter . still doing it. I can't find anything that might be leaking at the filter. I'm going to pressurize the fuel lines from the filter back to hopefully find a leak. I have a 93 1/2 to airforce K1500 with a 6.2 that does the same thing just not as bad. I live just north of...
My truck misses sometimes. Only under load. Just like a gas engine with a bad plug wire. It idles fine and sometimes runs great. But half the time it misses under load? Any ideas?
All gut no butt here. I have always had a hard time with the seat and steering too. I have a A1 and a A3 the A3 is by far the easier to drive on a trip. The A1 though can be changed with power steering ( smaller steering wheel) I also trimmed the cab lip around the top od the seat, then moved...