Search results

My garage door is 10' high and it just does fit with bows and cargo cover. That said, I have to pull the west coast mirrors in because I didn't think about the width when I had the garage built.

Can't say what WY POE would ask you for with your 5 ton, but with a CMV they want to see your plate reg, IFTA permit and ask what you are hauling. All the scale masters in WY are really great people.

After you start it bring it up to speed right away. Do NOT let it sit and idle. Seems that VR board does not like it when the set is running at less than 1800 rpm's.

I have to agree that its your truck to do with as you please. That said, Look at all the CCKW's, WC command cars that were farmerized after they were surplused after WW II.

They were michelin tires, don't recall the tire size, they did look to have some type of ctis sys. The MATV's are loud, sounds like straight pipes on them.

Hate to hear that, maybe you can make one good, and part the other two out.

I've hauled some of them. P/U brand new ones from the factory, loaded on the step deck and away we went. Heck if you want one just show up, sign the B/L and its all yours for free. Said to the wife, I'd just tell the claims dept, it fell off and I lost it. Till I told her that on the B/L...

Ran when parked, no keys[thumbzup]

I don't think its just N.C., but all the states are strapped for cash. They will try to make it up any way they can.:cry:

A lot has to do with how many are up for auction at a given location. Was out bid on a sale where only 3 were at that location. Won mine for about half of what I had bid in the first sale. Different location with 20 or so in the sale got lucky with a mep002 w/ask, runs great I was a little...

"No light indicates a bad glow plug" That would only tell you that you have no voltage to the plug. Use a DMM ohm out the plug, a good GP will ohm out between 1-3. Above or below that and the plug is bad. If you should find a bad GP, you are most times better off replacing the set, since you...

Gm parts direct shows the part number in stock. GM PART # 14028949 CATEGORY: Thermostat & Gaskets PACK QTY: 1 CORE CHARGE: $0.00 GM LIST: $19.14 OUR PRICE: $11.74

Ohio should give you credit for the tax paid to PA. Then you only have to pay the difference. Had the same thing happen with IL using the the date that the truck was won and not the sf97 date, for plates.

Try www.gmpartsdirect.com, some times thay are cheaper than LMC, some times not.

From the 34p, 915449,915450 would be your GM part #. 18 PAOZZ 11862 915449 LENS,LIGHT LEFT 1 18 PAOZZ 11862 915450 LENS,LIGHT RIGHT 1 19

The m1009 Midnight rider bought was from my buddy Ed, that one came out of Drexel Gardens, IN. My 1009 came out of the Army depot here in GC had more rust than Midnight riders. There have been some 1009's on craigslist of late in STL. I'm glad that I kept the 1009, because I belive that my dodge...

There is a lift ring on the mep003, that I belive if you were to use it, should be about the center of gravity. I do know that the base of a cherry picker is not wide nuff to clear the skid of the mep 003.

Items sold by us, which are changed to a Demil Code status of other than B or Q from Demil Codes A, B or Q, or are otherwise determined to be restricted by DRMS, must be returned by you to the nearest DRMS facility, and you will be reimbursed for the purchase price and any documented...

If it were me, I would convert it back to the stock 24/12v config system. By doing so you can use the TM's to trouble shoot the system, also if left in the current setup it makes it very hard for someone here to try and help you out when or if you run into problems. It may not be the best...

That CCKW :drool::drool::drool: