Search results

Sounds like you are doing a good deed. He is lucky to be dealing with you!

My -34 says 1/2-20x2.12. The 8 bolt is 1/2-20x2.00.

My old -34 says: Lubricant, runflat assembly, use with radial tire part number 89307-2. You might try searching for that and MSDS sheet. It comes out pretty well with Dawn soap and warm water. You are correct, the packet ruptures when runflat contacts tire and reduces friction to keep temp down.

My M1008 came with the rifle barrel mounts removed. A local club member found a M1008 that was being parted out. When I drilled out the pop rivets I did not notice that there was any difference between right and left. Well, there is a difference which I discovered after installing. I used...

AS I recall the urethane ones are better because they do not squeak when dry.

Bought some surplus GI steel toed boots at a gun show for 20.00. Worth looking for!

A difficult problem. The older the CARC, the harder it is to clean. A perfect hand print on side of 998 in the 383 green. I tried Dawn, acetone, lacquer thinner, simple green and nothing worked completely..Was going to repaint anyway but tried RAPCO 383 without priming for touchup. The print...

Welcome from Texas. Agree with all the electrical advice. Review the TMs. None of us knew anything about 24v until our first military vehicle. Any chance of rodents gnawing on wires? Good luck and keep us up to date.

Easternsurplus, Kascar, ebay prices vary widely

Pins are made by Bulldog code BD500231. Also Beltfed34 has had some in the past. Check with him.

Ke5eua is in Temple and has advertised on SS. Sounds like he knows what he is doing. I'm in Sa Antonio but no room to store in our neighborhood. If I can help let me know. Bob

Used Citrastrip and covered with plastic wrap in sun. 24 hrs later it scraped off with razor scraper. My thanks to whom ever suggested this. Will wet sand to blend edges and then prime and paint. Great web site!

Never flat towed. I have driven 65mph with no problem but not with run flats or bias ply tires. I would expect some balance issues so would stop and check fasteners such as lug nuts etc. I am sure you will check geared hubs and differentials before starting. If you have the early parking...

Welcome from Texas

Welcome from Texas

Had a very large Chinese made visebreak doing a gun project. Fairly loud noise but no flying parts, etc. Won't buy another Chinese vise! Did not consider repairing it.

Homeland Defense and Police Supply. Forget address. Just google them. Have been great to buy from!

I am going to write 100 times tonight in my Big Chief tablet " I will not get overspray on my windows ever again" Two or three widths of blue tape will not work. Got in a hurry ...wind was against me...excuses, excuses. Spent some time today with razor scraper on M1008. Will try some lacquer...

goat The average car show attendee in SA won'tknow what goat is let alone what is original...(except the MVPA members)

Not to worry...Mark has a sense of humor as indicated by his comment on rubber components and wallets!