Search results

You might try lusterless OD current issue 34086, or lusterless Marine Corp forest green 34052. I ordered several od colors from RAPCO and made color plates with sheet metal. They are a big help. Your truck is probably just faded.

The red tops slide into the adaptors and you can use the original hold downs.. Always best to secure batterys.

I would try another switch. Don't forget to disconnect the ground cable when doing anything on the HMMWV.

I found many parts on ebay but ended up ordering some parts from KASCAR.

My 94 H1 has the earlier bumper with the triangular shackle stops on the ends. The later A2 has the round ones and is galvanized. The main difference I see is the A2 has a larger reinforced hole for the single point hoisting shackles, which seem to be harder.to find and more expensive. There...

Welcome from San Antonio!

Great job. Wish I had bought mine from you. What are you going to ask for it?

They never let good yellow paint go to waste!

M151 First request: info on AM Gen M151A2. Vin 11639700B151, serial on data plate 506621B15166083. NSN 2320001779258. Was told it was USMC and does have USMC green paint left. No unit markings. Thank you and will gladly contribute. Bob

Both the water and fuel plastic cans fit the old brackets I have.

Try Kascar.

I concur with the 2 trucks idea. Many of these trailers are almost new. It seems a shame to scratch or damage them..Sometimes removing the top brackets can be challenging if the bolts are rusted and the rivnuts begin to turn.

Welcome from San Antonio

Thanks for sharing a solution for a problem I haven't had, yet. Hope to see you on Sat.

We are finally seeing some questions from the new HMMWV buyers. Took a while for EUCs to clear I guess. Lets welcome them and try to help. From some of the questions many have not read the -10. We were all there once. Every new MV owner helps the hobby, off road or on road ! Hopefully, the...

Welcome from Texas. Be sure and read the rules.

Welcome from San Antonio

I usually put some epoxy in the hole and on the outside of the rivnut taking care not to get any in the threads. Also watch the torque. You can break any rivnut loose with enough torque. I know...

In answering a question I like to cite the TM and then give an abbreviated answer to save the questioner time. I hope this is still acceptable

I went with optima red tops on adaptor trays. Only problem was that the GI terminals tended to rise as I tightened them. I think there is more taper on optima posts. I have had good luck with Optimas in other vehicles. Much lighter than 6TLs!