Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You can ask what you want , you can sell it for whatever someone will give you for it . No winch and the buyer can look at and drive it $6000 - 6500 . The winch trucks at Sparta last week closed at around $5500 . My winch truck at Sparta last year I paid $7700. :(:(:(. I don't think I will make...
depends what part of the country you buy from .
A3 no winch as low as $ 3500 - 6500
A W/W $5900 - 8500
From an individual as much as u are willing to pay .
watch ebay and see what they are selling for ( not what they are asking ) . That will give you a good idea what to pay from an...
Don't know why I did not think of that !! These lock nuts are the stamped style I think that would work but I wouldn't want to be the guy holding the wrench . I will mount up one on the outside and put on the truck and see if I like the way the tire sits under the truck . From looking at the A3...
Looks like I will be putting the plate on the outside . The holes in the adapter plates are to big for the studs to stick . The nuts are lock nuts , so The stud would just spin in the plate and would not tighten up . Oh well, just saved me some time . I think once I get all the studs and nuts on...
Knocking the studs out was my main concern . I just went out in the garage and gave one 2-3 mild taps with a 3 pound dead blow hammer and it flew right out . If the other 95 studs come out as easy I think I will put them on the inside . I thought they would ome out much harder then they did ...
I am putting some hemmit rims with adapter plates and 395's on my A3 . My qeustion is what is the best place for the adapter plates ? On the inside of the rim or the outside . I think they would look better on the inside , but I am wondering if it is worth nocking out all the bolts to put the...
I had the same problem with Eric and others . They said they could do it , but when the EUC cleared I had a hard time finding someone to haul my two trucks .
I was qouted $70 a gal for type two waterborne and $120 for a gal of the hardener . I think it is two to one so hardener would do two gallons of paint . So you would have 3 gallons ready to spray ( more if you thinned it with the sugested water ) at $86 a gallong .
Mine was missing a counterweight in the rear and had the shake , it got better after I added the counterweight but still has some shimmy at the 48 - 50 mph range . If I take it to 55 it smooths out but then I am turning the engine a little fast . I have a set of hemmit rims and 395 tires that I...
That was scary close . You can tell by the way they broke away that the pilots were concerned about saving their butts and **** with the routine . The heat also may have affected the prformance of the aircraft making the loop on the down side a little larger than intended .
just one door is about my max lifting weight . I would geuss a door with glass at 80 pounds .
I put a door on a scale and came up with about 73 pounds . I have a bare cab but no way to weigh it . It was put ona trailer with a tractor,taken off trailer with bobcat .