Search results

ok let's see first how cold can I shot this stuff before it runs real bad? The spots where there's like 60% old paint or primer and 40% bare metal how should I prime just shoot the whole thing or what? two how many under coats should I have 2-3? I have some lacquer primer should I use this...

USE jack stands OR BIG A$$ wood blocks when you work onder the deuce with the wheels off I've seen guys crushed under tractor's after makeing this mistake.

Well I couldnt think of a better subject header so here we go I'm looking for a few new spare tire's for my deuce(might buy bigger one's and single it out) so here's what I've found first NDT's new from Titan see link http://www.titanstore.com/store/military.html found a post on mil-veh.org...

this tread is to help figure out how to prepare for for a long long distance trip in the deuce including preparation, pre trip check's and what tools, parts to carry with you let's start with the obvious. belts, hose's, bulb's including head lights, fluid's ,oil ,coolant, brake fluid. let's...

what is the TP 50 marking on the fender for?

here's pics

after looking around for GL-1 gear oil for the deuce here what I came up with. 1.Shell Dentax Gear Oil 80W-90 $48.00 for 5gal's 2.Delo Gear Lubricants ESI 80W-90 called tech support they say it's safe for brass and bronze parts this is a GL-4/5 3.Kendall All-Oil Gear Lubricant SAE 85W-90 also a...

What do I need to do to prep my engine for paint I know it need's to be clean and lightly sanded is there any thing else like should I prime it or no or just prime the bare metal?

ok I'm geting ready to repaint my truck so I need to figure out what tool's I need. I have two spay guns a craftsman suction feed and a De-vilbiss touch-up gun,should I get a chep pressure feed gun or try and go for a good one I wont need to paint much maybe a piece here and one there,and should...

how do I pull the fenders off the deuce is it just the bolts under the amber lights,head lights and the back of the wheel well? I'm doing this to aid in replaceing the engine.

before I install the new engine I want to paint it and the engine compartment plus the fenders but I need to know what kind of paint for the engine I can get 383green matched locally but I dont have a clue what line of paint(from PPG or DuPont) to use any help would be great paint's going on in...

hey I just bought one of fredrader's M103A3 trailer's and a gen-set, I need to know wich manual has the instructions for hooking up and operating the trailer and I was looking for some where to get the canvas for it.

when I was googleing some stuff and ran across this company they make a One Piece windshield and a exhaust stack muffler for the deuce that looks pretty good. http://ourfarm.org/webs/Extreme_db/default.asp

At 9:52 EST a large yellow Central Transportint truck delivered my new(used but new to me) Hercules Engine Co model LDT-465-1C(1D my bad see below), and on that note the new engines air compressor looks weird not like the one on my older LD-465-1C engine any one know why?? going to try and get...

I need to mount this gauge with a flexible tubing, plastic? maybe, you can see the NPT(I think) fitting so any ideas.

called berg today $50EA for the 11.00R20 XL's I want a little less for NDT's so what I need to know can I run them dished in without fliping the hubs since I'm going to be going back and forth from the singles to the 9.00 dules and how much are good deuce rims worth.

been trying to find out what color this is its on a lot of Memphis Equipment Company trucks(bottum pic more so top looks like 383 green)

anybody in PA that can get a engine to a loading dock.

here are the pics I promised wyttearp look where I am pointing the engine mount stays on and a pic of head light tower.

hey guys got my engine out it was a lot of very hot and hard work me and a friend got it out with a fork-lift and some chain. Wyattearp I got a lot of pics comeing if you have any questions just PM me and I will try to help. and does this look like a 1c or 1d turbo