Search results

Also I the rear blackout wiring I just capped off to run civilian style rear lights. Not sure if that effects anything?

Ok so I tried unplugging the flasher and it did do anything as expected. What I did notice, stupid me is the new flasher 11613631 does work if I don’t have my headlights/night time running rear lights on.,which is weird. So what I have now working front and rear turn signals also brake lights...

I will try to see what I get when I unplug everything. I will see if I can pick up a flasher with a ground on it.

https://www.grote.com/warning-hazard/flashers/2-pin-flashers/44850/

Welp it didn’t work. So I bought a Grote 44850 flasher thing and I can’t get that to work either. Hooked it up to the A and B on cannon plug. With that I only get steady light on, on the blinker handle, and no blinking at all. The 44850 is supposed to be for led. Any suggestions? Maybe...

If I can’t get it to work I’ll be making my own. Haha https://www.steelsoldiers.com/threads/m-series-flasher-relay-civvy-conversion-how-to.134679/#post-1743825

It didn’t work. I’m going to try a couple thing with it before i say it doesn’t work.

Perfect, I’ll take a closer look at what I got going on.

Thank you guys for helping me out. Haha

I’m kind of confused still haha. So in my case do you think one of my tie rod ends is wrong? Or is the sleeve thing on wrong? Is the sleeve a direction specific thing. Like one side is for right hand only and the other is left hand only? thanks for all the help.

Serial number is 252865.

I have an M1152A1.

Any idea if the grease fitting is an indicator of what hand tie rod I have. Seen some pictures that the fittings are on the same side as each other.

Thanks for the good info. Yeah this thing is way out of alignment. I was going to take it to a semi truck place to get it aligned. I wanted it to be close as I could get it in the mean time. But I will have to correct this first haha

Hahaha Thunderbirds that seems to be my problem. My truck is a Marine unit as well. Not sure what knuckle dragger was working on it. I can get it to move around quit a bit, but it is useless that way. So moral of the story is the radius sleeve thing is most likely cross threaded on one end and...

This is the movement when I try to adjust.

So I think my tie rod ends are mixed up on my front right of my truck. Went to do a string alignment and started to adjust things. Went and started to move radius sleeve and noticed that the thing doesn’t move the tire. The tie rod ends appear to be moving in sink with each other versus pushing...

Perfect, I’ll give it a try.

So I have done some reading and can’t seem to settle on what led module to get. I have led front marker lights and some civilian style rear lights. The rears have regular incandescent bulbs right now. I also have the led bulb in turning handle. This gets the tears only to blink. Tried a bunch of...

Thank you!