• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. mistaken1

    Stereo advice from some sound guys plz

    So what kind of db's are you talking about in order to drown out the truck/road noise with the stereo?
  2. mistaken1

    another update on my engine swap. engine starts and dies 5 minutes later.

    I did not think you could reverse the connectors but not knowing where you got your truck a previous owner could have engineered them to reverse. If I understand you correctly, that the engine runs until that cold advance de-energizes, sure sounds like it is reversed. Is it possible the...
  3. mistaken1

    another update on my engine swap. engine starts and dies 5 minutes later.

    You don't have the idle and cutoff wiring reversed on the pump by chance?
  4. mistaken1

    GEN 1 Charging issue

    Be polite but firm. Good luck.
  5. mistaken1

    OK Greybeards Help Me Out Here I need you man

    I showed my wife a picture on the internet and said "See that? That's your new truck." I have used that line for trucks, trailers, generators and anything else she does not realize she needs it until I point it out to her. rofl
  6. mistaken1

    M1082A1 recovery

    Wow it does make the deuce look small.
  7. mistaken1

    M1009 electrical problem

    LOL It's just a flesh wound.
  8. mistaken1

    Odd wire issue

    Please keep in mind that the picture of the relay is showing 12V at the top power post. That is only if you have done a 12V glow plug conversion. In a stock system that top post will show 24V until there is current flow through the resistor on the firewall to the glow plugs. Then the voltage...
  9. mistaken1

    circuit board

    These were put up earlier by warthog but his thread disappeared.
  10. mistaken1

    M1009 electrical problem

    Thank you for the after action report. Glad to hear you got it working correctly.
  11. mistaken1

    M101A2 Axle Bearing and brake questions

    Your welcome. :grd:
  12. mistaken1

    M101A2 Axle Bearing and brake questions

    See if this won't help. Open up the wheel and check the bearings, they may not be bad just need the nut properly adjusted.
  13. mistaken1

    rear window crank problems

    As others have pointed out it's either unlocked or broken. Welcome to wonderful world of GM design where they put a large movable window in the middle of a truck tailgate.
  14. mistaken1

    Indicator lights at start-up; Bulb replacement

    The -10 manual indicates which lights should be on but in simple terms other than the 4-wheel drive light they all should light when the key is first turned on (this is to verify the lamps are good).
  15. mistaken1

    M105A2 actual rated payload

    According to the October 1990 manual I have the rating is 3000 pounds, period.
  16. mistaken1

    Mep002

    See if these won't help.
  17. mistaken1

    Starter Troubles???

    So your momentary push button switch is grounding one side of the glow plug relay coil when the switch is activated? (the blue wire side of the coil)
  18. mistaken1

    fuel filter mod w/pix but still not running!

    Thanks for the after action report!
  19. mistaken1

    Wait Light Question

    Bad key switch? Do any other lights come on when you turn the key on just once?
  20. mistaken1

    First Deuce, need some help

    You have a diesel powered light switch? The instructions. Please read them before putting 13,000 pounds of truck on the streets.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks