Search results

If you need I have a tow bar if you have truck close to a what your pulling. Not every one should be as crazy as me for pulling my 813 with the little M35 that can.

Leave it stock and enjoy

I got my rebuild kit from diesel injection service louisville ky Ph#(877) 361-2531 and ask for Jack. They were very help full and will work with the diy ers or do it all for you. As far as rebuilding a pt pump its easy and you don't have to put it on a test bench as long as you don't lose a...

Anyone have a J pipe for a M35?

Any one have a 5 ton air filter rain cap button thing? And a spair tire lift arm for a M-813 just need the top part. And a springer seat base or complet.

Ive towed all kinds of heavy stuff and if you just take a little extra time it can be done safeley. Yes it will be at Haspin this year. My dad will be driving it and il drive my little deuce that can. Thanks for everyones help and input.

Ha quick grip I just noticed it.

70 dollar fix. New seals bearings and metering shaft with drive dog. Even cranked up the AFC valve while it was out. Bolted it up and primed it for an hour and it started and idles Has plenty of power. It was easy to rebuild the pump and well worth knowing it has all new parts now. Just need to...

Indy 4x4 will have a shower setup and Ill be supplying the water from the buffalo. Ill have a pump the kids could use. Just need a truck to plug it in to. And if we empty it will just refill from the hose at the office. I try to keep the inside clean for drinking water.

I have a hydraulic BFH. One hit and its in a million little parts.

Its on my list of things to do Monday.

We have already had a Gimpy on its side T-shirt. Im in favor for Gimpy positing system showing a stuck truck. I to have gone Ok Ill go were Gimp says to go.

SS Rural Electric Co-Op What next running water in everyones RV / Tent? May be we could set my water Buffalo up on some of sparky's telephone poles for consent water pressure.

I finley got around to removing the Ip today. I found that someone else must of started to remove it. All the mounting bolts were snug but loose and one missing.(Explains the oil leak) It was easy to remove and once off I started the disassembly were I found lite rust and a broke governor...

I pulled a 5 ton with my 2 and a half. Dose that count?

Any flares this year Gimpy?

Im no export but Id just replace or repair it and be dune with it. Its nice when a little oil will fix it but sometimes you just have to rebuild parts.

WT% why do you need a creeper? Are you tall like Stretch44875?

ok I pressure tested the fuel system and found no leaks. Off with the IP.

I carry a grease gun in the cab. And re grease after driving in water and road salt. I found that I can grease my truck in 10 min.