Search results

Also take a little time to install a remote brake reservoir kit. A guy is selling then in the classifieds or you can make it yourself easy enough. Checking that little hole in the floor is not much fun!

Not entirely correct. Adjust the speed till the generator is running 60 cycles per second, leave it there. If it gets higher or lower than 60 cps re-adjust it.

My guess. Left side 8ESB Right side B# Left side might be 8ENG. I doubt they would even put 2nd Force... KISS system. # would be whatever truck number you assign. Usually 6 might be reserved for the commanding officer's ride.

Go with Delks. They have matched pairs and both the transducer and meter should be replaced. In the meantime you can get by with a KillAWatt unit. Cheap. " Kill A Watt P4400 Kilowatt-Hour Monitor with LCD Display $15 online, $25 nearby"

It has been discussed. Give it a try for sure. The most effective methods so fat have been new tires and adding 5 lug nuts across from the hub cap. Please post up what you find and good luck.

Not as fancy as you describe Joe but I drill a hole under the passenger seat, install a Caterpillar on-off switch (keyed) and hook up a 2 foot battery cable from the battery to the switch. I then hook up the trucks negative battery cable to the other side of the switch. Real easy and keeps the...

AAR = After Action Report.

The dishonest part is a problem for sure. Take out transmissions are available pretty cheap. You did check the drive line for loose bolts? That is a disappointing day for sure. At least you had a good chance to check it over first, I have bought 3 knowing nothing of their condition. BTW I...

When I first got mine more exhaust came out the bottom then the top. The good news is replacing the "J" is pretty easy. I just use a coffee can, and almost always forget to remove it till the engine sends it flying.

Someone on here worked on the line at GM, said these things were rusting even as they rolled toward the door back then. :driver:

If it ran an hour before it should not even need glow. Mine did that as the IP died, had to pour water on the pump to get it to start each time it was off about an hour.

Keep her rolling! :driver:

The wrench is for sale here http://www.steelsoldiers.com/tools-misc-sale/78266-air-compressor-wrench.html

Special wrench on the air compressor pully, it screws the pully in to tighten and out to loosen. It can be done without the wrench but it is harder. Also I think there are a couple of tightening bolts. Pretty simple.

Welcome from WV

If the part don't fit, they must aquit. :jumpin:

That is a good gig for that Senior Special Agent. In addition to his GS pay scale by having the title Special Agent he qualifies for the 25% extra pay for federal law enforcement officers. Cool job chasing trailer residue and getting overpaid plus a big bonus. Not exactly hazardous duty for...

You have a lot of preventive maintenance ahead of you. The axles need drained and so on. Beautiful truck.

Title?

You will love the 395s. Be safe over there. :beer: