Search results

Couldn't get there this year, but next should work. Thanks for the great pics.

I found jack nuts at Lowes. They were the correct size and somewhat cheap.

I pour on a little (well, more than a little) ATF. That stuff really travels and seems to soak in well.

Also Karl (Antennaclimber) has them with some upgrades. Great product and service. http://www.steelsoldiers.com/parts-sale/81266-cucv-glow-plug-module.html#post1034996

I bought three of the "new in crate" ones in Ohio for $600 each from GL. Just barely hauled them on my M116 flatbed. Moved them around by hand. Very unfun. :mrgreen:

I got 395s on my A3 and I am not experiencing any of the above referenced problems.

Engine is Caterpillar, transmission is Allison. Both companies will gladly sell you parts and service. :beer:

The HMMWV engine is nearly identical and has the turbo. You have to move a few things around but lots of folks have done it.

WOW! I googled steelsoldiers hacked and we are famous! Sites all around the place showed up.

No apology needed IMO. Monday, Monday, so good to me Monday Mornin', it was all i hoped it would be Oh Monday Mornin', monday mornin' couldn't guarntee That Monday evenin' you would still be here with me Monday Monday can't trust that day :beer:

Parlusk- great to see you back! On my trucks I put a Caterpillar 7N0718 battery cutoff switch below the passenger seat. Real easy to do, and that gives me the same key for both trucks. It is real heavy duty. Caterpillar Equipment Battery Disconnect Switch 7N0718 I just drill a hole below...

Read this too! Latest and greatest... http://www.steelsoldiers.com/cucv/84051-part-number-correction-better-fitting-belts.html

I used Rapco and just rubbed the cover with thinner before painting.

It will make some sense to get a modern cargo cover kit with vinyl top and all the hardware. I use the vinyl top all year, then put the canvas top on just for the summer as needed. Might save some money over the long run. I don't think anyone is selling the canvas with bows kit.

The shelves sound like a radio set up. Are any rubber lines on the suction side? Can they collapse? I went through the same stuff, finally changed the fuel tank, all lines, pump and filter. Seems there was a lot of algae in the lines and the new pump woke it up and sent it downstream. Good...

One large gauge wire goes to the negative post on the starter, the other large gauge wire goes to the solinoid on the same post as the positive cable.. The smaller gauge wire goes to the other post on the solenoid. On mine the missing fuel line goes to the fuel pump just above the NATO plug...

While any degree of painting professionalism is OK, if you want good lettering use a paint mask set. There are a few guys on here who will make them up for you with your unit numbers and the stars and TP stuff as well as fuel tank and drain air tanks. Makes it real easy to do. I have a hard...

I had a similar problem and spent less than $5 on a block-off plate for the pump opening, then added an electric pump on the frame. :driver:

It refers to the price of toilet paper in 1985. Common mistake. rofl

lower headlight location Funny looking headlight arrangement... Low Mounted Headlights Some unusual Deuce parts Early M35 Q: Headlights and gauges Flipping headlights Headlight position Headlight location