Search results

Yes , the adapter and most of the parts are avialible on ebay from Equipment Sales (vendor) some of their parts are pricey and some are dirt cheap , roll the dice I guess Good Luck, I have a line on a few hard to get items occasionly if you need hard to find stuff , check with me and ill see...

The biggest problem I have is the Parker swage on the end , seems NO ONE here has a clue and cant replicate it, perhaps I am asking the wrong question. Is there a napa fitting number that can be used thanks guys.

is their a site like the M 35 parts list here for goats , have lots of cross numbers

good luck hope it all works out ok , glad to see you can adapt , overcome and still have fun!

goat tie rod ends, loose steering , check them , found a good supply!!!!! took a while but found an endless supply of left and right inner and outer tie rod ends for Goats

Thanks for the most concise and logigcal explanation I have seen to date, good job guys! Please keep the site updated

the radiator is a standard GM configuration, any good rad shop can order you one, if the top and bottom is good get it rodded and repaired, the brass tops tend to get brittle , but last time I changed mine I paid $420 .00 for a new one

Hello peashooter. Wondering if you are still doing the gauge pods Andy

just added a M109 a3 to my 2 M 561 gama goats and an M 38 with a 416 trailer, hope it comes out even half as nice as yours , that the best lookin 109 I seen in ages! Now I need to figure out how to get it from Waldorf MD to Landaff NEw HAmpshire

not either of mine, hope you find it, Its like finding a lost coon hound after a night of hunting, maybe even better than the ex wife saying she wants to come back!

No need to remove the spring, the brake line may be clamped in the A arm channel but its just two clamps , pop the tire off and block upthe hud , you will have plenty of room , easy way to bleed it is to run a rachet strap around the brake shoes and then bleed it , with hub off

great lookin Goat!!

Forgot to ask . how many do you need

Ill get on this tommoorrow, looks like enough info to find them. Andy

Hey guys, has any one got a good Moog or equivalent part number for the outer tie rod ends ( at the wheel) for a goat. ball joints, universals , now the tie rod ends , at least I am working towards the end, Thanks Andy

Hi Joe , see you haven't got any replies as of yet, I put mine in with the desire to not hole the hull , I used grade eight 7/16 bolts and self locking nuts with flat washers and mounted them to the seat tube frame , low on each side. in addition I put in shoulder harness and sub belts mounting...

Thanks Gama ( dam almost put too m,s in there to ) Goat ! you were spot on and NAPA had them all on the shelf , although they were a little dumbstruck when they asked to see what I was putting them in and they came out side , LOL loL lol , my new buds, NOW they can't wait to look up odd ball...

HI FRANZ. I got the seals from Timken , unfortunately they are a renumbered seal and the wrong part, I have since reinstalled mine and cant see the numbers any longer , please look on the steel ring of your seal and msg me all the numbers you can find and I will querry Timken from here, ANDY

Allo , Franz, Its Thursday in the east coast, Iam still waiting for the new batch to arrive , I should have them by Monday and if they are the right ones ill msg you Andy

Ask and you shall receive , Was looking for the P,n for the u joints and found them here, super thanks Super Dave, will try the numbers at the local NAPA tomorrow, Andy