Search results

I have a M101A2 and it works very well with the HMMWV.

Below may help: DOT3 DOT3 brake fluid is the "conventional" brake fluid used in most vehicles. Advantages: DOT3 fluid is inexpensive, and available at most gas stations, department stores, and any auto parts store. Disadvantages: DOT3 fluid eats paint...

OK, I'll play. Mark

I got the half doors from Midwest but have not installed them yet. I am trying to get them to make an upper part of the doors with the window to bolt onto their half doors. Now that would be the best of both worlds for the winter and summer. Mark

After doing alot of e reading I wanted to give a try with Rustoleum Fabric paint spray for my green and blue high seats. They did not have a od green so I went with flat black. Took just over a can for each seat and I am really pleased with the results. Seats look new and the reviews of this...

Very nice setup. What storage case is that in the back. May want one of thoses. Thanks, Mark

Mine has the same setup with the vertical forward bracket repositioned on the lower rail and welded in place. Mark

But with a fan with such an aggressive pitch I wonder how much air can be moved with the clutch disengaging at a much lower RPM than with a fan designed for a clutch setup. Mark

Lets see some pics. Mark

No they are stiffer for sure. Mark

I run about 43 psi and it rides alot better then when I had them at 50. Mine are E rated tires. I installed tire valve pressure caps that let me know if the pressure goes under 40 psi. These E rated tires still look full at 15 psi. Goodyear MT/Rs. Mark

I replaced the old oak slats with 1"×4" solid mahogany. All the wood only ran 75 bucks. Two coats of linseed oil and one coat of beeswax and lemon protector. Should hold up well. Mark

I replaced the weathered troop seats oak slats with some nice mahogany and stainless steel hardware. What do you think? Mark

http://www.steelsoldiers.com/showthread.php?111832-Found-10-30-volt-1156-LED-bulbs-!&highlight=

That is the spot I had planned on putting mine. Did the bracket behind the dash keep you from putting it higher? The other spot I thought of was on the upper left side of the doghouse. Well done. Mark

I will be there about 5. Mark

Well it is good news as the leak was the transfer case cooler and bypassing it fixed the leak. Been driving the truck almost every day and having a blast. Mark

I'm going to bring my HMMWV over to the Liberty Tree Mall cruise night tomorrow if the weather holds. Should be fun. Mark

Yes I will thank you

Oh I was as the transfer case was filled to the brim with tranny fluid. Mark