Search results

Is there any play in the bearings so the yoke can move around?

I have one like that on my M35A2, I think it is a good idea to let the truck idle and cool down and the turbo spin down a little before you shut it down.

I'm not a a/c guy, but the high side looks a little low with the fans on.

You said when your fans turn on the high side was 270, what does the low side read. On my three systems the low side runs around 30-40psi.

dac9901, I see 37 degrees sometime, most around 40 degrees. My fans run about 5-6 seconds then off for 25 or so.

I have the Red dot system installed on a M923A1 and the condenser fans turn on and off.

But a M35 bed is two foot shorter then your M923 bed.

Welcome from AZ.

Thanks, That sound like fun!

It is a lot of work and $$$ to get the full setup for the LWS, but in the end it is worth it. I have a hard top that is in bad shape and needs some work, my plan is to cut a hole in it and add hatch to it.

Glad you got her going. Yes it does get hot, LOL, that is why in some of my 5tons I have a/c in them

Yes there are three filters to replace, the primary is on the right side under the motor to the right a little on the frame. Also the fuel line runs from the primary filter to the IP pump and that line sometimes is crushed.

Welcome form AZ.

You can reuse the clamps.

That is a fine looking hard top. One of my AC installs there was a pin that was pushed in and the fans would not come on.

Welcome from AZ, nice truck, but you need to paint it green, lol

LOL, Very nice!!

Try http://www.vintagepowerwagons.com

Very Nice find!! Should be a great project.

Is there a drain for the block on the 8.3 like on the NHC250?