Search results

I It's absolutely possible. Not to mention these are apples to oranges. Your standard household breaker is a thermo mag breaker (thermo being the slow overload trip, mag(netic) being the inrush. Their trip curve (time vs current) is rather forgiving (especially GE breakers). Now for...

It's not the FLA you need to look at right now. It's the inrush. They can take as high as 10 times the FLA on startup

Short answer: it's normal, and holding closed is a not so good idea Long answer: These are momentary switches. So the return to center is normal. The way these circuits work is electrically held. Meaning when you select closed the contactor closes and electrically holds itself on...

I believe that's what it's for,

Typically breakers are sized to protect the wire (or in the case of a generator the head) so increasing breaker size is usually asking for trouble

The power in my neighborhood was so bad that a breeze would take it down. Last major outage was Irma, 9 days with no ac in september sucked. ever since investing in MEP (and a few bad legal words to the utility) the longest outage was 2 hours.

This is why I keep a spare belt on hand. And several spare generators... Sent from my SM-S908U using Tapatalk

That's the best solution. You can usually use the existing wiring, just bypass the transducer

IIRC Donaldson P131919

Close but you're off by 1

Wasn't this a 005?

Gauges are nice, but can't beat a fluke

Called It!

Sealent wise look at the instructions it will list what's useable. I usually use locktite 567 (not a threadlock, it's a sealant for oils.

Ive never seen one. However I have been playing with the idea of re-annodizing one and having it laser engraved Sent from my SM-S908U using Tapatalk

Quite simply Add load Long answer: wetstacking can be an issue however it doesnt happen overnight. What i do is after an outage or on a periodic basis wire in a set of heaters and let it bake. If you are really concerned that it needs to happen now any heavy load appliance will do ( Bake a...

There is nothing preventing you from : A. Turning on the generator with line power available B. Turning the generator on during an outage with the house main in the closed position. The only thing preventing the generator current from reaching outside of your home is a written procedure of...

You are setting yourself up for a massive injury to yourself or others. To properly feed your house you need at minimum an interlock to prevent generator current from ever leaving your home. Using the generator lugs as a feed through to power your air compressor is a big nono. Sent from my...

Hz and volt yes. Not sure on overexcite (sw3) Sent from my SM-S908U using Tapatalk

I would go over everything you moved and double check connections. Then you need to see what voltage the avr is seeing Sent from my SM-S908U using Tapatalk