Search results

Thanks for the offer! Right now it looks like VA to MA is what I am looking for. Again, thanks for the reply. Mark

I have a pending purchase of Builder77's(Ethan) gen trailer and would like to try and get it towed East, prefer Maine but I have three places near Boston, MA that could hold and take it from there. I missed bringing this home by one day when I was there getting my CUCV pickup. At that time it...

Must be a VA thing, I had mine fixed, $175.00 with new joints/balanced.

Looking for the uprights/bows and tarp for a 3/4 ton generator trailer. Please let me know if you can help, have CUCV CDR valves to trade if intersested. Mark

Great, I am happy I can help, still plenty in stock and a free one with every order! Mark

Still plenty left, to all who have sent payment, I have received your payments and ship most every day. When and if I get low I will let the group know. Thank you

If you have reverse and 1st I would check the vacuum pump/lines and shift switch on the injector pump first. Any failure with these items and the transmission won't shift. It's rare to have a bad transmission on a M1009. My recent m1008 purchase from VA had rotted vacuum lines on top of the...

The local fire dept has a M1010 and I converted it to 12v as they were having the typical electrical problems. I removed all wiring in the charging system and purchased a commercial 125A self exciting alternator and installed it on the right side, replaced the 24v meter with a 12v unit(same...

My recent M1008 purchase from GL was listed as no start. Seemed to be the famous starter relay as it was removed and in the seat when I got the truck. I replaced the relay and it started so I thought the problem was solved. After a recent fuel pump/fuel filter change while I was cranking to...

Looking for two cables inside the shelter. They would be on the roadside originally connected to the TT-76 teletype and then to the switch box in the center cab end. They are CX-10507/G and CX-10512/G. Thanks

Sent a call tag for it today, going to try just bubblewrap on the fender first. If that goes through the door is next.. Only OEM original GI parts for my trucks. Thanks for the comments.

Thanks, still looking for one.

Has anyone shipped or received a cucv complete door or outer fender? Just curious if I can use fedex ground or have to go freight. Also how was it wrapped, plastic wrap, boxed, etc? Thanks.

Pictures posted above, thanks.

Just wanted to let veryone know how big of a help Robert was the past few days with my M1008 recovery from Richmond, VA. As most have read Ethan had made arrangements to get the M1008 moved to his house two days prior to his passing. Jason stepped in and finished with the move to Ethan's house...

I am missing one of the J-2728/GRC-142 interconnecting boxes for my shelter. Anyone strip out a shelter or have an extra please let me know. Here is the picture of the box. I also need the clock and the fuel fired heater.

No, M151 dash is shorter and has fewer gages, no tach or air pressure, etc.

Payment received, thanks. All orders as of today, 5 August have shipped.

Please read the first post of the sticky for payment info. Thank you

Sure, plenty to go around. Mark