Search results

This is a Military Gen and while it is a 12 wire there is no "Standard" setting for single phase. There is a "Reconnect" board that switches it between 120/208 & 240/416. A knowledgeable Generator Mechanic could probably reconfigure it to provide single phase but it will not be in the TM. and as...

That is the twin to my S-280.... What is inside? It is a Telephone Multiplexer, Mine was stripped of all equipment, but they left the racks.. Gutted the electrical box, As to the A/C they will be 18k BTU could be the 208 3ph 50/60 hz or 400hz or, could be the 208/230 1ph/3ph 50/60/400 hz wont...

Am I missing something?Did anyone else watch the MKT in FT Gordon... Who in their right mind would pay $6650+ Fees and Taxes for a MKT missing the burners and who knows what else? Have they gone up this much? 7360 - Sets, Kits & Outfits: Food Preparation & Serving at Government Liquidation

Karl, if they are MIL A/C's they are more than likely both HEat and cool. (The dual 18k ones on my S-280 are) also unless you are lucky they are more than likely 3ph..... ( Gunna need a Genny heheheh)

Glad I am not the only one... I thought it was Friday the 13th .....

Sign Me Up......

I cannot see any advantage in getting stuff from there unless it is Uber Rare.... Shipping will KILL your Budget.... and the Corrosion will already have killed your new toy.... Just my 2c

I have paid the "Late" Tax once or twice.... :( I also have had them be very gracious... Depends on who you get on the phone... and the alignment of the earth and the moon.... Also had them "Lose" lots..... Good Luck...... and May the Stars Align properly for you :mrgreen:

The one I saw in the classifieds a while back had a LARGE Black & Decker Radial saw and a lift gate on it...The power requirement is not an issue as I have 3ph on the farm and a few MEP Gens of varying sizes. I am kicking myself for not moving faster on the thing.... Guess I will have to...

I have seen in the past some of these m-105 trailers kitted up with large radial saws and other engineer equipment. I am putting in a wood fired boiler to heat both by 80x50 shop and my living space. I will be sourcing my wood from a local sawmill (Slab Wood) looking at the size of the saw I am...

Welcome to the Site from Casnovia Too bad that trailer sat out for so long... I would love a M-104

I would recommend looking at a 5 ton chassis, The $1000 deuce is becomming a rare bird. A M818 would probably be a good candidate. The last 2 I have bought went for less than 2k, There are a few advantages with the 5 ton over the deuce. IE more room under the hood, Stronger drivetrain, already...

I have dealt with Steve Haney on a several occasions, a total A1++ experience Straight shooter with reasonable prices.

I too would be interested in this "Mod" how about the reconnection switch off a MEP-003?

Hola, Mey, Welcome to the Site. Malaga is one of my favorite cities in Espana. I also enjoy Ibiza.... Will be there this summer.... Looks like you got a good truck there. This site has many knowledgeable people and a lot of good information avaliable. Again Welcome!! :driver:

Westech I will both agree and disagree with you .... I have about 10 years in heavy truck driveline experience. and the "Puck" discs you are referring to I assume are the ceramic friction material? They are "Better" in the area of Oil and other contaminants do not cause them to slip. but they...

If you are thinking of using something like that I would recommend trying silicone or something similar as it would flex better than JB Weld....

Ok, so I will ask the "Obvious" stupid question here.... what is a cartridge starter?

Was that a 806a or an 806b..... and have you seen the 804b yet? I do so love the B Series Gens....

JunkYardJohn...... This is just my humble opinion I would rethink swapping the axles from the Blazer onto the Contact Truck. The 4.56 ratio on the M1031 is about right for a load of heavy tools and such. if you are looking for highway speed I would recommend looking into a 700r4 or 4L8E tranny...